LumberJocks

Curved front hall table

  • Advertise with us
Blog series by exelectrician updated 01-08-2015 09:33 PM 2 parts 5012 reads 17 comments total

Part 1: The tapered legs

12-20-2014 04:07 AM by exelectrician | 11 comments »

After completing my hanging tool cabinet build I decided to push myself to attempt some sort of inlay work coupled with curved wood. This table in No 77 of Woodsmith Magazine caught my eye and I decided to have a go at it. Here are the results so far. In this posed photo I have the sled I made for this project, with the tapered on four sides leg. the rabbets cut on the top and bottom take the contrasting dark wood (sapele) 1/8” inlays. Then 1/4” rabbets are cut on all four cor...

Read this entry »


Part 2: Curved front hall table #2

01-08-2015 09:33 PM by exelectrician | 6 comments »

To make the top six ribbon sapele offcuts from my wood supply shop were edge glued, planed, and joined. Then I used the template with a 3” diameter ring centered and carpet taped to my router base to trim the jigsawed oval shape to the final dimension. First I routed a classic ogee on the top edge and put a 3/8” round over on the back, my wife preferred the ogee to be on the down side, so the rounded side became the top!I put Daleys ‘Benite’ to seal all the surfaces an...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com