edward60's Blog

  • Advertise with us
This blog is written by edward60 | 4 entries so far

Latest Entry

Greene and Greene dining table

06-07-2016 12:57 PM by edward60 | 13 comments »

I want to make this table for a long time. But I had not self-reliance for this project. And some time ago I decided to make it. I used for this table sapele, padauk, wenge and ebony for plugs and splines.First I glued top of padauk. The sizes top 70”x47”x1 1/2”. I made template from veener and routing edge of the top. Then I routing edge with router DeWalt Then I made sapele edges with another temmplates For joint top and edges I routing groove for the biscuit joint. Gluing edges to the top Making square holes for ebony plugs. Routing grooves for ebony splines on the edges Gluing ebony splines For comfortable work I glued different sand paper on the ...

Read this entry »

Older Entries

  • Wall sconses - 04-30-2015 09:35 AM | 3 comments

    Some time ago I made four wall sconces with Greene and Greene details. Because I have many fotos ...

  • Miter Saw station - 11-21-2013 06:06 PM | 2 comments

    Some time ago I finished my miter saw station and decided to share with Lumberjocks community.For...

  • Greene and Greene Ceiling Lamp - 02-23-2013 08:56 PM | 9 comments

    In this blog I’ll show to you the process of making Greene and Greene ceiling lamp. 1. T...

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics