eddit's Forum Topics

  • Advertise with us
View eddit's:homeworkshopprojects (0)blog (0)reviews (0)forum topics (4)buddies (0)favorites (0)activity logWatch
04-10-2019 10:54 PM

Black stains on wood from Bessey parallel clamps (not pipe clamps)? - 9 replies

Never had this before (least not that I’ve noticed) but I just took some walnut panels out of bessey clamps and had black stain marks where the glue line met the clamp. I had assumed this was only a problem for black pipe clamps. Have I just been lucky up till this point? Was it the walnut? Ive cleaned my pipe clamps in the past with white vi...

11-13-2018 03:13 PM

When is dry rotted sapwood a concern? - 4 replies

I purchased some air-dried lumber from a local lumber guy, walnut slabs. I noticed that the sapwood on the edge (1 or so inches thick) was dry rotted. I can break off a bit by hand, with some force. I planed a bit of the heartwood and it looks great. In contrast, I’ve purchased kiln dried lumber from another local guy, and the sapwood seem...

10-20-2018 02:19 AM

Fading cutting board after first use? - 5 replies

My first cutting boards (bear with me), 3 coats of Boos mineral oil (overnight between coats) and then two coats of Boos board cream (overnight between coats), and then waited a week before using. First use was a hot steak, 5-10 minutes off the grill (probably not the best “first run” idea, but I was excited, and hey… it’s steak) and n...

10-09-2018 02:00 AM

Mineral spirits to clean dust off cutting boards? - 12 replies

New to the sport, so forgive me, but just made a few cutting boards. I used a wipe down of mineral spirits to remove all the dust and started to worry if this was a bad idea. Will an overnight evaporation clear all my concerns? Can’t find a definitive answer on the internet. I plan on finishing the boards with Howard’s board oil and condition...

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics