LumberJocks

e28guy's Favorites

  • Advertise with us
View degoose's profile

Open weave Lazy Larry #1: Ripping the stock.

07-14-2011 11:28 AM by degoose | 12 comments »

I am about to make an open weave Lazy Larry…similar to this one. I have ripped some Tasmanian Blackwood into the required strips….. these are just over 600 mm long and 50 mm by 20 mm For our American cousins… 2 feet long and 2 inch by 3/4 inch.. Tomorrow I will be ripping some thin stripes of Huon Pine and Tasmanian Blackwood to make the accents… Strips will be only 3 mm thick [ 1/8 inch] The background will be Huon Pine….. cut into 50 mm squares̷...

Read this entry »


View jfk4032's profile

Tumbling block cutting board techniques, lessons learned and tips for cutting and assembly

01-13-2014 02:32 PM by jfk4032 | 13 comments »

After looking through some other blogs here on LJ and watching some Youtube videos I thought that the tumbling block cutting board was something that looked challenging, cool and something I wanted to try. I learned some good ideas from these other blogs and wanted to share some of my experiences having now made three of these, my setbacks and discoveries to better produce these tumbling block patterns. I purchased a Wixey digital angle gauge as it looked like you really needed to be accu...

Read this entry »


View SPalm's profile

Another Cutting Board Design

07-12-2010 05:00 PM by SPalm | 27 comments »

I am in the process of building another board and thought I would share my thinking process along with some build pictures. When I came up with the design for the Steps board, I was thinking about how one draws a 3D box on a piece of paper. You draw a large square, and then add small mitered edges to one corner to give the appearance of seeing it slightly from the side. Making these miters out of two different woods adds to the shadows, which adds to the effect. I did this for the Steps b...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com