Updated shop pics.

looks tight but neat i would like to get a shipping container but i think that would be pushing it with the P.O.A.

-- gagewestern

Nicely done. Thanks for the post – I also have a small space and this gives some great ideas on layout/flow.

-- Life is a one lap race.

You have a LOT packed into a little space. Good work!

FWIW, it looks like you have the older 30 micron bag fitted HF DC. You might want to upgrade that to 1 micron filtration or better. Stick a Thien baffle in the inlet ring and call it good. Cartridge filters are preferable, but bags work if you are on a budget. Highland Hardware sells the 1 micron bags…

-- Please like and subscribe to my YouTube Channel https://www.youtube.com/c/daves-workshop

Lot of action in a narrow space…........you have made do with tight quarters…...

-- Jim, Anchorage Alaska

super shop ,well laid out and very well organized

-- https://www.artisticwoodstudio.com/videos

Thank every one, and about the dust collector, I plan on building a covered area behind the shop to put it outside, so any dust that does escape, wont be inside the shop.

-- I GIVE UP!!!! I've cut this @!&*!% board 3 times.... its still too short!

Hey drfixit: One really nice thing about a small shop and workspace—- you don’t have to walk very far to get to the tools!!! But the room is nice, if you have it. Sometimes I think my shop is TOO big after walking from one end to the other—wears me out!! Anyway- great layout. I always thought there were pros and cons to shops. Work safe!

-- " There's a better way.....find it"...... Thomas Edison.