Chairmaking at the Appalachian Center for Craft #3: Day 3

  • Advertise with us
Blog entry by doorslammer posted 07-14-2010 03:52 AM 1896 reads 0 times favorited 1 comment Add to Favorites Watch
« Part 2: Day 2 Part 3 of Chairmaking at the Appalachian Center for Craft series Part 4: Day 4 »

This morning we started by gluing up a bent lamination that will become our chair backs. What a mess! It’s funny how well yellow glue acts as a lubricant until it dries. All those layers really wanted to squirt loose until the clamping pressure was equal.

After that it was more work on roughing out the front legs and front rail and cutting all the mortises using the Festool Domino.

The remainder of the day I spent cutting the decorative curves out of all the rail pieces that were previously rough cut in 8/4 stock. After laying out the curves on the top edge of the rail pieces they were cut out on the band saw and then cleaned up with the horizontal belt sander and oscillating spindle sander. These two machines were key in this process. They made it so fast and easy to clean up the rough band sawn surfaces.

At the end of the day, I had two sides mocked up and ready for some final sanding and glue up tomorrow.

Oh, one more thing. I was looking around a little at lunch and found a couple of these great Krenov style planes that I guess some of the students made. I think I may have to find some time to take these for a test drive tomorrow.

-- Aaron in TN -

1 comment so far

View a1Jim's profile


118153 posts in 4549 days

#1 posted 07-14-2010 04:37 AM

Looks like fun Aaron I’ll keep watching.


Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics