LumberJocks

don1960's Favorites

  • Advertise with us
View McLeanVA's profile

Cutting Board: How To's #1: Zig Zag Cutting Board - How To:

10-04-2010 11:38 PM by McLeanVA | 68 comments »

For those of you who asked me for a tutorial on how to make the zig zag legless vegetable death table (cutting board), here is my best shot. I am far too impatient to take photos when I work, so I decided to illustrate the process using some good old Adobe PhotoShop. I hope you find this useful and informative. I will outline the process in 10 steps below. I have assumed that when viewing these steps that basic woodworking skills are familiar to you. If you have questions, or run into snag...

Read this entry »


View Daris's profile

Marble Tic-Tac-Toe Game

03-20-2013 02:21 PM by Daris | 1 comment »

Here was an easy project that I did recently; a Marble Tic-Tac-Toe Game. You only need one board for this project and it’s something you can build in an afternoon. Here is my attempt at making a video of how I made it, and as always you can check out my website at: www.woodlogger.com to see more projects and videos of what I’m doing in the shop.I also put up a listing of free project plans that you might find useful.    

Read this entry »


View dustbunny's profile

Tight Weave the Down and Dirty

08-08-2010 07:16 PM by dustbunny | 15 comments »

Several people asked me to blog the process of the tight weave board.The original tight weave board was posted by degoose here as a blog. Larry Rocks !! I don’t actually have one to be made from the start right now, so I pieced together what I have to try to illustrate the process. In some places you will have to use a little bit of imagination, but I think it will be clear. Okay, the key to the weave or the tight weave boards is-1. lumber should be square2. cuts must be accurate3...

Read this entry »


View dewoodwork's profile

Beautiful end grain cutting boards free project plan

11-25-2007 07:31 AM by dewoodwork | 97 comments »

Construct these beautiful end grainCutting boards Hello fellow woodworkers,In the spirit of sharing woodworking knowledge I am writing this tutorial for anyone interested in constructing these beautiful end grain cutting boards. Take a look at the photos of the four styles I have made, or create your own pattern’s and follow the steps I have outlined in this tutorial. Questions and comments are welcome, enjoy. For this board I used maple, walnut, lyptus and purpleheart. White oak, wa...

Read this entry »


View SPalm's profile

Double Tumble Cutting Board

05-31-2011 03:11 AM by SPalm | 41 comments »

Or maybe I should call it Two and a Half Steps. Anyway, I cannot believe that I am building another one of these, but heck, they are so much fun. This is a continuing saga of endgrain geometric boards using three contrasting woods. A light color, medium color, and dark wood selection are jointed and planed to the same thickness. I started by tilting the blade to 60 degrees and ripping an edge on all three boards. I then moved the blade over about an inch and ripped again creating a sma...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com