Ti Tree Lazy Larry #2: Cutting the Ti Tree Round...

  • Advertise with us
Blog entry by degoose posted 11-22-2011 09:48 PM 8306 reads 0 times favorited 11 comments Add to Favorites Watch
« Part 1: Milling and glueing. Part 2 of Ti Tree Lazy Larry series no next part

Once the glue was dry… I left the blank in clamps for 24 hours… to make sure…it was off to the bandsaw and onto the circle cutting jig..

Just a matter of rotating the blank on the pivot point….

And a few minutes later it is in the round…

Pop it through the drum sander, sand the edges using the circle sanding jig on the disc sander

A little mineral oil to bring out the colour and you can see how fantastic the grain really is..

-- Don't drink and use power tools @

11 comments so far

View Joe Lyddon's profile

Joe Lyddon

10923 posts in 4832 days

#1 posted 11-22-2011 09:53 PM

... and all you really did was glue, cut, sand, finish!!

What could be simpler!

Very good!

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: ... My Small Gallery:

View degoose's profile


7273 posts in 4135 days

#2 posted 11-22-2011 09:54 PM

Having you do it….. would be simpler, lol…

-- Don't drink and use power tools @

View SPalm's profile


5336 posts in 4662 days

#3 posted 11-22-2011 10:31 PM

I’m simple.

Wow that grain does pop. Reminds me of some teak I have seen. Nice.

-- -- I'm no rocket surgeon

View cajunpen's profile


14578 posts in 4846 days

#4 posted 11-22-2011 11:10 PM

Oh my goodness!

-- Bill - "Suit yourself and let the rest be pleased."

View lew's profile


13127 posts in 4535 days

#5 posted 11-23-2011 12:36 AM

What Bill said- OMG

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View amagineer's profile


1415 posts in 3377 days

#6 posted 11-23-2011 12:43 AM

As Steve mentioned, it has very similar grain to some burmese teak I picked up a few months ago. What does the future hold for this wonderful piece of nature you created?

-- Flaws are only in the eye of the artisan!

View Snookie's profile


173 posts in 3272 days

#7 posted 11-23-2011 01:33 AM

It turned absolutely Beautiful!

-- Snookie, Jasper,GA

View Karson's profile


35223 posts in 5181 days

#8 posted 11-23-2011 01:55 AM

Great looking board.

-- I've been blessed with a father who liked to tinker in wood, and a wife who lets me tinker in wood. Appomattox Virginia [email protected]

View matt garcia's profile

matt garcia

1917 posts in 4452 days

#9 posted 11-23-2011 03:43 AM

Love it!!!

-- Matt Garcia Wannabe Period Furniture Maker, Houston TX

View Jim Bertelson's profile

Jim Bertelson

4275 posts in 3945 days

#10 posted 11-23-2011 05:51 PM

Sometimes, just beautiful wood, properly worked, blows everything else out of the water….....


-- Jim, Anchorage Alaska

View a1Jim's profile


118066 posts in 4357 days

#11 posted 11-23-2011 05:55 PM

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics