Next Generation Cheese boards... #8: Cutting on the down angle..

  • Advertise with us
Blog entry by degoose posted 11-21-2011 02:52 PM 2451 reads 2 times favorited 16 comments Add to Favorites Watch
« Part 7: Same but different.. Part 8 of Next Generation Cheese boards... series Part 9: Alternating the stripe. »

Instead of cutting perpendicular to the down chevron L to R… I cut down almost parallel to the other chevron R to L..

This give a totally different pattern..

As this was a test it will be rather small.. so it will have a frame around it.. tomorrow…

-- Don't drink and use power tools @

16 comments so far

View Bob Collins's profile

Bob Collins

2683 posts in 4102 days

#1 posted 11-21-2011 03:02 PM

The variation turned out extra well. All LJ’s must be tempted to have a go after seeing your boards. Great
looking pattern.

-- Bob C, Australia. Your best teacher is your last mistake.

View matt garcia's profile

matt garcia

1910 posts in 4090 days

#2 posted 11-21-2011 03:02 PM

You’ve definetely broke the “lines are our friends” rule!!! I’m dizzy!!!

-- Matt Garcia Wannabe Period Furniture Maker, Houston TX

View Don Butler's profile

Don Butler

1092 posts in 3814 days

#3 posted 11-21-2011 03:11 PM

Larry, That looks like the traces of one’s heartbeat on an electrocardiogram (sp?).
You could call it “Lifeline” or somesuch!


-- No trees were damaged in posting this message, but thousands of electrons were seriously inconvenienced.

View Lee A. Jesberger's profile

Lee A. Jesberger

6866 posts in 4398 days

#4 posted 11-21-2011 03:12 PM

Larry, This looks like the same generation you’ve been working on.

Nice work though.

For being lazy, you sure do get a lot done!


-- by Lee A. Jesberger

View patron's profile


13649 posts in 3760 days

#5 posted 11-21-2011 03:35 PM

’where no bloke
has gone before’

nice !

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View Jim Jakosh's profile

Jim Jakosh

22878 posts in 3524 days

#6 posted 11-21-2011 04:14 PM

Right on , David. Larry you are leading edge on these patterns! Thanks for sharing all your techniques!!..Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View grizzman's profile


7836 posts in 3722 days

#7 posted 11-21-2011 04:17 PM

beuatiful larry… are going where no bloak has gone before..i love it all

-- GRIZZMAN ...[''''']

View blackcherry's profile


3343 posts in 4241 days

#8 posted 11-21-2011 04:41 PM

David it more like “They broke the mold on this bloke”...nice work as usual Larry, it good to see the inspirational chair is still working…toucan ups…Blkcherry

View Napaman's profile


5530 posts in 4496 days

#9 posted 11-21-2011 06:28 PM


-- Matt--Proud LJ since 2007

View Joe Lyddon's profile

Joe Lyddon

10645 posts in 4471 days

#10 posted 11-21-2011 09:12 PM

Yellow Brick road…. (hic)... Yelleer Birk Roooad… (hic)....

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: ... My Small Gallery:

View ElmoSr's profile


241 posts in 3445 days

#11 posted 11-21-2011 10:00 PM

degoose—-the only thing better than seeing your ideas come to life would be to work under you for a few months—thanks for your generosity!

-- ElmoSr,Ga. Life is Hard by the Yard,,,But a Cinch by the Inch

View Sam Shakouri's profile

Sam Shakouri

1200 posts in 3506 days

#12 posted 11-22-2011 12:40 AM

Preciseness in cutting the angles is the key factor in the success of projects like these, there is no room for any tiny mistake and you managed to hit the targate right in the centre.You are the king of precision, Larry.

-- Sam Shakouri / CREATING WONDERS WITH WOOD.....Sydney,Australia....

View cajunpen's profile


14578 posts in 4484 days

#13 posted 11-22-2011 04:48 AM

Hey that looks like my last EKG. Nice looking boards (timber) You Are The Man when it comes to cutting boards!

-- Bill - "Suit yourself and let the rest be pleased."

View redryder's profile


2393 posts in 3520 days

#14 posted 11-22-2011 07:19 AM

Ya, I see what you mean. Could be the stock market…....

-- mike...............

View rance's profile


4271 posts in 3579 days

#15 posted 11-22-2011 03:54 PM

Larry, You’ve taken this technique to the next level. Great job and thanks for sharing.

-- Backer boards, stop blocks, build oversized, and never buy a hand plane--

showing 1 through 15 of 16 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics