End Grain Cutting Board LJ Class 006 #15: Thus endeth the lesson.

  • Advertise with us
Blog entry by degoose posted 07-13-2011 12:20 AM 9737 reads 3 times favorited 10 comments Add to Favorites Watch
« Part 14: Rub me with oil! Part 15 of End Grain Cutting Board LJ Class 006 series Part 16: I got me a certificate... »

As the finishing touch to the boards of the class… I have counter-bored holes at each corner.

The black rubber feet are attached with stainless steel screws..

The counter bore will stop the rubber feet from dragging the screws out if it is moved sideways…

Well I am glad that this is finally finished… I know it took what seems an eternity and I do appreciate those who followed along… I have already had two photos of finished boards sent and I would like all those who finished the boards top post them in the comments section… Also please contact MsDebbieP to arrange your certificates.. Thanks once again…and I hope you all had as much fun as I did…

-- Don't drink and use power tools @

10 comments so far

View Karson's profile


35193 posts in 4816 days

#1 posted 07-13-2011 12:32 AM

Great job Larry:

I plan on ngoing back and working my way through them to bet a fresh look at all of the activities.

-- I've been blessed with a father who liked to tinker in wood, and a wife who lets me tinker in wood. Appomattox Virginia [email protected]

View razor524's profile


70 posts in 3422 days

#2 posted 07-13-2011 01:18 AM

Great class, thanks!!

View Joe Lyddon's profile

Joe Lyddon

10640 posts in 4468 days

#3 posted 07-13-2011 01:40 AM

Thank you very much, Larry…

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: ... My Small Gallery:

View BertFlores58's profile


1698 posts in 3338 days

#4 posted 07-13-2011 03:00 AM

Thank you Larry, You really had pushed to do a cutting board. The smallest one I had was a gift to my co-worker at office and she was very glad to display rather than use it as cutting board. You encourage me to make two achievements:

God bless,

-- Bert

View Grumpy's profile


25442 posts in 4267 days

#5 posted 07-13-2011 04:43 AM

Brilliant mate.

-- Grumpy - "Always look on the bright side of life"- Monty Python

View lanwater's profile


3113 posts in 3350 days

#6 posted 07-13-2011 06:12 AM

In August I should be able to buy me some decent lumber and go through the tutorial.
The arrangement and grain matching video really was an eyeopener.


-- Abbas, Castro Valley, CA

View Beginningwoodworker's profile


13345 posts in 4089 days

#7 posted 07-13-2011 02:41 PM

Good job, Larry.

View rrdesigns's profile


532 posts in 3602 days

#8 posted 07-14-2011 03:06 PM

Thanks Larry. I appreciate your taking the time to do this. Here are my first attempts. I followed and learned from your instruction, but I tried to create my own designs.

Biggest challenges were eliminating gaps (mostly caused by planer tearout of the maple) in the glue-ups and getting the boards perfectly flat without the use of a drum sander.

-- Beth, Oklahoma, Rambling Road Designs

View MsDebbieP's profile


18619 posts in 4576 days

#9 posted 07-17-2011 04:48 PM

I think this is “class006” .. I will have to confirm that and get back to you.
If the class projects are tagged as such they will be easy to find.

Also, once you have posted your project, message me and I’ll send you your LumberJocks’ Certificate!

(great class, Mr degoose. Well done!)

-- ~ Debbie, Canada (, Young Living Wellness )

View AngieO's profile


1267 posts in 2563 days

#10 posted 07-31-2012 04:27 PM

Can’t wait to make one of these!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics