DIY 20u + Server rack. #3: Sanding and finishing the parts.

  • Advertise with us
Blog entry by dbhost posted 05-18-2018 02:27 AM 1124 reads 0 times favorited 2 comments Add to Favorites Watch
« Part 2: Making space to work Part 3 of DIY 20u + Server rack. series Part 4: final assembly and DONE! »

Not the most detailed, but sanding, and finishing the pieces for the server rack build.

For those of you interested, this video also features the Grizzly overhead air cleaner running, gives you an idea of how loud it is.

-- Please like and subscribe to my YouTube Channel

2 comments so far

View Jim Bertelson's profile

Jim Bertelson

4275 posts in 4507 days

#1 posted 05-21-2018 03:17 PM

One thing I don’t have to deal with is high humidity. The humidity is higher in our vacation home, but still nothing like yours. The only high humidity living I had were my two years in Taiwan while I was in the Navy, back in the 60’s.

When I do rattle can spray painting, I can spray another coat in 15 or 20 minutes. Living in Alaska has got to have some blessings… (-:

One thing nice about electronics stuff is that you just expect it to be black so there isn’t any issues about color choice. And of course, black goes with everything…

-- Jim, Anchorage Alaska

View dbhost's profile


5870 posts in 4574 days

#2 posted 05-22-2018 06:44 PM

I hate the humidity, it takes forever for finishes, glue etc… to dry and fully cure. Kind of hte opposite of how it was when I lived in Arizona, when finishes dried too fast…

-- Please like and subscribe to my YouTube Channel

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics