Jig for ripping crooked lumber
Snagged some nice quarter sawn Ash recently that’s crooked on both edges so I made this jig to rip a straight edge. The six 1/4-20 stop bolts were inspired by a bunch of sawmill videos I watched and the gadgets they have for handling irre...
628 reads | 2 comments | Continue reading »
3 comments so far
surfin2
home | projects | blog
51273 posts in 4631 days
#1 posted 02-18-2013 03:22 AM
Welcome To LumberJocks.
Good Luck…
-- Rick
a1Jim
home | projects | blog
118334 posts in 5072 days
#2 posted 02-18-2013 03:36 AM
Welcome to Ljs a world wide community were there are great people,super projects and great woodworkers.Enjoy !
Because I often get asked questions by new members I’ve included the answers to the most( FAQ) along with my welcoming message to LJs.
You should know that posting questions or projects here (your profile page) will not get you very many responses’ just because it’s your profile page not part of a main forum. To post in a main forum read below.
Want to know how to post something?
See the drop-down box underneath my Lumberjocks in the upper right hand corner. Click on the arrow and select which type of posting you want to make (Project, Blog entry, Forum topic). This will take you to the appropriate page and you just fill in the form.
Sending Private messages(PMs) to other members
Click on the word” home” next to the profile picture of the member you want to contact ,then click on “send message”
http://lumberjocks.com/help/getting-started
Need help with posting or other questions ?
Contact:
Martin SojKa ( LJs founder)
http://lumberjocks.com/msojka
Ms DebbieP AKA Debbie Pribele (Ljs community manager)http://lumberjocks.com/MsDebbieP
Just for the record even though I have a large number of post I’m not involved with LJs management ,I’m just another member.
-- https://www.artisticwoodstudio.com/videos
SnowyRiver
home | projects | blog
51520 posts in 4975 days
#3 posted 02-18-2013 03:58 AM
Welcome aboard. It’s great that you could join us on Lumberjocks.
-- Wayne - Plymouth MN
Have your say...