dalec's Blog

  • Advertise with us
This blog is written by dalec | 6 entries so far

Latest Entry

Bosch 4000 Table Saw Fence

05-05-2008 10:47 PM by dalec | 12 comments »

I bought a used Bosch 4000 table saw about a year ago. I have found the fence simply won’t stay parallel to the saw blade/miter slot. I set up the fence using a dial gauge. As precise as I have been, I have found, the fence setting won’t stay parallel. As soon as I try to set the fence to rip, the outfeed end of the fence has drifted toward the saw presenting a potential kick back concern as well as an imprecise rip. This is a bench top/portable contractor saw, so I don’t expect the precision of this table saw to be cabinet saw precise, but expect the fence to stay in alignment. I have concluded that I need to replace the current fence with something that will re...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics