cyclops4069's Blog

  • Advertise with us
This blog is written by cyclops4069 | 3 entries so far

Latest Entry

DIY HAND PLANES #3: wedge and blade

05-08-2014 12:17 AM by cyclops4069 | 4 comments »

Finally did a bit of work on the wedge and a blade. The wedge was fashioned from a piece of Jacaranda (light cream/pink in colour). A nice contrast to the deep red/brown of the body. In shaping the wedge, I ensured initially that there was an even distribution of loading along the length of the blade from the wedge, however, I then dished out a very small hollow (micro hollow) from the bearing surface of the wedge to put more emphasis of loading to both ends of the wedge over the blade. This achieved the locking in of the blade at the cutting end. the idea is to make sure that there is enough load without creating such stresses that will force the bed to crack under load and separate from...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics