| This blog is written by cutmantom | 16 entries so far |
-
Did I come up with a new idea
I needed to drill into the end of a workpiece for a dowel but didn’t want to tilt my drill ...
-
Craftsman tools
What is with Sears, I took a wrench in for warranty, they didn’t have one in the store so t...
-
Shopsmith Craig's list find
Tried the table saw function but didn’t like it at all, I really was only interested in...
-
Latest tool find
Picked up this set of auger bits, seem to be like new, I have seen boxed sets that I would love t...
-
tool gloat, l hope
Picked up these planes from CL, I really have been wanting a45 and a router plane and thought I w...
-
jointer rehab #6: long time coming, finally some paint
-
jointer rehab #5: cheating a little bit
My body work skills weren’t getting it done, a frien d of mine works at a body shop and ...
-
jointer rehab #4: welding shop
Got the holes welded up and put a little primer on
-
jointer rehab #3: picture for clean up
-
jointer rehab #2: clean up
cleaned up the base with a wire wheel and drill then washed it off, I am going to try to weld up ...
-
jointer rehab #1: Before and dissasembly
I got this old jointer for basically nothing and I want to try restoring it
-
Traditional Sawbench #4: finally done
The sawbench is donethe mortise and tenons were glued as well as pegged the top joints were do...
-
Traditional Sawbench #3: Starting to come together
The joinery was cut for the legs and temporarily screwed in place to start working on the stretch...
-
Traditional Sawbench #2: Milling parts
The top was glued up and milled to finished size, the material for the legs was also milled for t...
-
Traditional Sawbench #1: Traditional Sawbench Build-plans and material
I decided to make something that was for myself, this plan is from popular woodworkingthe materia...
-
Porch Railing
re worked railing, lowered so it wouldn’t be in line of sight when sitting down, used o...
