Peter Bilt Trucks

  • Advertise with us
Blog series by crowie updated 08-08-2020 06:53 AM 2 parts 1403 reads 10 comments total

Part 1: One mean looking PanTech is started!

08-07-2020 06:16 AM by crowie | 4 comments »

One mean looking PanTech is started! I firstly started with a engine and cabin on a chassis… It looks okay well a good start! Take the roof off to reveal the insides! And it even has a gearshift and a steering wheel for Aussie roads. Now to cut out and glue up the back…. Used most of my clamps to get that done! WOW! It looks big! And the back doors worked out well… The top of the PanTech Box or lid was tricky for...

Read this entry »

Part 2: And on to the next part of this make it as I go build!

08-08-2020 06:53 AM by crowie | 6 comments »

And on to the next part of this make it as I go build! The rear axle can be screwed in place as the box will cover the screws. Two tone on the fuel takes make it look like straps. Double check the fitment of the lid. A couple of exhaust stacks. Fitting and strengthening the cabin roof with a couple of axle pegs through the “A” pillows.Air horns on the roof too….just shortened golf tees.. A rear bumper bar with taillights and an a...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics