LumberJocks

Stand Up Jewelry Box #7: More small work

  • Advertise with us
Blog entry by cowboyup3371 posted 01-28-2018 04:49 AM 719 reads 0 times favorited 1 comment Add to Favorites Watch
« Part 6: Ring Tray and Smaller boxes Part 7 of Stand Up Jewelry Box series Part 8: Carcass work finally started »

I haven’t had a lot to really post lately but by the end of today we have made some decent progress on the internal pieces and should be able to start finishing them tomorrow night finally. The ring/music box lid frame is glued up and ready for its glass though I had some fun with that part earlier today. The glass shop I bought the glass from didn’t cut one edge very straight and while trying to shave off a small sliver of it, I ended up breaking a larger chunk than I wanted. So off to Lowes I went and got a replacement piece. I also glued up the ring tray, add some tray supports, and helped my eldest glue up her drawers. I realized I didn’t cut my supports long enough so I’ll have to add in a couple of extra to keep it from rocking when pushed.

I’m really hoping to start the carcass work tomorrow morning as I had other personal stuff to take care of today.

-- Cowboy Up or Quit - If you are going to quit than get out of my way



1 comment so far

View fatimanaheed9's profile

fatimanaheed9

9 posts in 138 days


#1 posted 09-27-2019 03:12 AM

The glass shop I bought the glass from did not cut one edge straight and while trying to shave its small cone, I ended up breaking a larger chunk than I wanted. Can you work for custom-writing.org ? So I went to Lowes and got a replacement. I also installed a tear pipe, inserted a tray support, and helped my oldest child to brace his dolls.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com