LumberJocks

CNC Carvings #6: Yesterday's Project

  • Advertise with us
Blog entry by copythat posted 01-02-2019 04:36 AM 503 reads 0 times favorited 9 comments Add to Favorites Watch
« Part 5: The reason for the season! :-) Part 6 of CNC Carvings series no next part

I had the pleasure of meeting Lumberjock Jeff Arney yesterday and showing him my Legacy Maverick. It was nice chatting with a fellow CNC enthusiast. Jeff, if you are on here, this is what was on the table during your visit . . .

-- Rob



9 comments so far

View OldCharlie's profile

OldCharlie

10 posts in 78 days


#1 posted 01-02-2019 05:14 AM

Outstanding work!

-- Oldcharlie

View robscastle's profile

robscastle

5725 posts in 2500 days


#2 posted 01-02-2019 10:53 AM

Looks like gwadarzameenpk needs a pair of “bracelets”
Nice job on the CNC! what is the timber specis?

-- Regards Rob

View copythat's profile

copythat

167 posts in 901 days


#3 posted 01-02-2019 01:49 PM



Looks like gwadarzameenpk needs a pair of “bracelets”
Nice job on the CNC! what is the timber specis?

- robscastle


Thanks. The wood is cherry (currently bare with no finish) and the carving is roughly 12” tall, 8.25” at the widest point, and .735” thick.

-- Rob

View Redbone's profile

Redbone

19 posts in 108 days


#4 posted 01-10-2019 01:59 AM

Thank you Rob for the invite and the hospitality during my visit. I really enjoyed talking to you and thanks for the special list of parts by email. That looks amazing with great detail!

-- Jeff

View Wade Putnam's profile

Wade Putnam

137 posts in 4025 days


#5 posted 02-22-2019 05:08 PM

For a project that takes so many hours, what do you charged for making a shield?

-- Wade, Nashville, www.mcgconstructs.com

View Wade Putnam's profile

Wade Putnam

137 posts in 4025 days


#6 posted 02-22-2019 06:48 PM

Nice

-- Wade, Nashville, www.mcgconstructs.com

View copythat's profile

copythat

167 posts in 901 days


#7 posted 02-22-2019 07:58 PM

I don’t make a lot of money per plaque but it keeps me busy and pays for the machine. I charge from $85 to $135 for a 12” to 13” carving in cherry wood. Examples of some of my work can be seen at Blackacre Woodcrafts on Facebook (https://www.facebook.com/profile.php?id=100033363799357).


Nice

- Wade Putnam


-- Rob

View Wade Putnam's profile

Wade Putnam

137 posts in 4025 days


#8 posted 02-22-2019 08:50 PM

Thanks Rob, still pondering the Legacy CNC.
Wish I was closer to Utah so I could see one.

-- Wade, Nashville, www.mcgconstructs.com

View copythat's profile

copythat

167 posts in 901 days


#9 posted 02-22-2019 09:18 PM



I don t make a lot of money per plaque but it keeps me busy and pays for the machine. I charge from $85 to $135 for a 12” to 13” carving in cherry wood. Examples of some of my work can be seen at Blackacre Woodcrafts on Facebook (https://www.facebook.com/profile.php?id=100033363799357).

Nice

- Wade Putnam

- copythat


Thanks Rob, still pondering the Legacy CNC.
Wish I was closer to Utah so I could see one.

- Wade Putnam

There are a few of us here in NC and VA that are willing to show our machines. I’m 4 hours from Johnson City if you’re interested.

-- Rob

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com