Moravian workbench build #10: Top not square to the legs now
Houston we have a problem. I started checking a few things and realized the top had become 1/4 inch out of square with the leg face over the thickness of the top. This is pretty severe and will cause problems where the leg vise needs to reference ...
433 reads | 2 comments | Continue reading »
3 comments so far
controlfreak
home | projects | blog
1609 posts in 571 days
#1 posted 06-29-2019 07:07 PM
Just thought I would say hi. Been lurking for a few days and decided to go ahead and join. Planning on doing woodworking in retirement which is still 8 to 12 years away (57). I bought a 10’ x 16’ shed that I now know is too small. I routinely pull my jobsite table saw & Chop saw out in the yard to make room for my workbench, drill press, jointer and yet to be built router table. Tools with wheels are my friends. Trying to figure out if I need to build a larger shop and where but with two kids weddings this coming year I have plenty of time to plan and no budget to get started yet.
abie
home | projects | blog
920 posts in 4741 days
#2 posted 09-14-2019 01:58 PM
There is nothing remarkable about the inside of this box
only holds my chisels and marking tools for Japanese Joinery
plans from the internet
-- Bruce. a mind is like a book it is only useful when open.
SuperCubber
home | projects | blog
1162 posts in 3254 days
#3 posted 09-09-2020 03:24 PM
Just wanted to say hello. I’m also in Spartanburg. There are a few other members from the Upstate as well.
-- Joe | Spartanburg, SC | "To give anything less than your best is to sacrafice the gift." - Steve Prefontaine
Have your say...