Project Information
Here's a set of four Walnut and Red Oak bar stools I made not too long ago. The seats have a curve carved into them using a home made router jig and the slightly angled legs keep the stools pretty stable despite the smaller seat. I designed these to fit underneath the counter top in my kitchen, which is why there is no back.
They're built with mortise and tenon joinery. The lower tenons are wedged while the top are pined with walnut dowel stock.
If I have the time I plan to make a kitchen table and set of chairs using some similar design features to pull it all together.
They're built with mortise and tenon joinery. The lower tenons are wedged while the top are pined with walnut dowel stock.
If I have the time I plan to make a kitchen table and set of chairs using some similar design features to pull it all together.