LumberJocks Woodworking Forum banner

Wooden Models

Tags
1929 ford van 1932 buick 1935 ford 1935 model 1951 ford 1955 ford 32 buick 32 chevy hot rod 32 chevy wooden model 32 chevy wooden toy 32 ford 32 lincoln kb 32 tow truck 34 chevy coupe 34 coupe 4 4 wheel 4runner model build automata axle axle springs belly bump model build bob cat bobacat bobcat loader bobcat model bobcat toy boring out a dowel box car buick building a caboose building wooden hummer bull dozer bull dozer build bull dozer model bull dozer model build bull dozer treads bulldozer bumpers caboose caboose build car car build car model car spoke wheels car spoked rims car wheel build caterpillar caterpillar antomata cattle car cattle car build cattle car train chevy chevy vette coal model train build coal train combined car train construction construction equipment construction model construction toy construction toys corvette crane custom model truck wheels daf delivery truck diesel train diesel train model diesel truck dir car diy delivery truck diy tires diy toy wheels diy train diy wheels doweling jig dozer build dozer high track dozer drilling rig ducthy build dump truck dump truck model dump truck suspension dutchs plans dutchy dutchy build dutchy model dutchy plan dutchy plans dutchys excavator dutchys plans ebonizing model tires escavator excavator excavator build excavator model excavator model build excavator tread making flat track ford 1935 ford truck ford truck model ford van 1929 ford van model build fork lift fork lift model gatto gatto train car grill making how to half scratch built truck heavy duty wheels hi gear dozer high track dozer hot rod hot rod chevy hot rod model hot rod model build how to how to build a model train how too htl htl 4 hummer hummer build hummer model hummer tires indy car indy car model jig joys and joys truck kenwort model build kenworth kenworth mack kenworth model locomotive log skidder lowboy trailer lowboy trailer model lr mack mack mack lr mack lr model mack truck mack truck model mack truck model build mack truck steering how to mag wheel maker mahogany make wood wheels making model spoke wheels making tires making toy wheels making wheels making wooden wheels maple mean wheels mining truck mining truck model model model 1935 ford model a wheel making model build model build toy model building model bull dozer model bulldozer model caboose model car model car build model cattle car model dozer model dump truck model excavator model fender work model ford model front and back suspension that works model hummer model jig model making model making jig model motor model rocket ship model semi model spoke wheel making model steering model sub model tire making model tires model toy model train model train build model train building model train model train how to model train toy train model truck model truck build model wheel jig model wheel making model wheel making model jig model wheels models morgan mud flaps mustang nautilus model build nautilus scratch build nautilus wooden oak train car old time tires old truck build passenger car passenger train car pickup truck pickup truck build plans poplar train power wagon 6x6 power wagon body work power wagon model build power wagon video prerunner model build race car race car hauler race car model race car totter railway breakdown crane model rat rod reading reading train reading train build ripper tine sanding sassafras scale model scratch build scratch build motor scratch build train car scratch build truck model scratch built scratch built caboose scratch built car scratch built diesel train scratch built model truck scratch built rocket ship scratch built sub scratch built train scratch built truck scratch built vw bus scratch built wheels scratch built wooden train scratch built wrecker bed semi model wheels semi trailer model build semi truck semi truck build semi truck model semi truck model build shop smith train skidder spoke wheels spoke wheels build springs sprint car sprint racer start build steam engine steam train steer loader steer loader bobacat steerable front end suspension t rex tablesaw tanker truck tender tire jig tire making tire making jig tj tow truck 1932 tower tower crane toy toy and joy toy and joys toy build toy build dozer toy build htl toy build truck toy building toy bull dozer toy caboose build toy car toy car build toy dozer toy dump truck toy excavator toy hummer toy jig toy making toy mining truck toy model toy model build toy motor toy power wagon toy rocket ship build toy semi truck toy tires toy train toy train build toy train car toy truck toy truck wood truck toy vw build toy vw bus build toy wheel making toy wheel making jig toy wheels toyjoys toyota model build toyota prerunner toys toys and joy toys and joys toys and joys dozer toys and joys model toys and joys train toys and joys truck toys joys tpy wheel making tracks trailer train train build train car train cars train cattle car train chimney train engine train model train model car train shelves train tender train tires train track build train wheels treads triceratops truck truck axles truck build truck model truck tires truck toy build trucks unimug video vw bus model build vw bus model build vw bus toy build vw model vw model build vw toy vw truck vw truck model vw truck toy walnut walnut truck well drilling rig wheel how to wheel jig wheel making wheel making jig wheel making tire making wheel wells wheels wheels for wooden train wood burning train wood car wood hot rod wood model wood model building wood store wood tires wood toy wood toy how to wood toy truck wood toys wood train wood truck wood wheels wood working jig wooden body wooden caboose wooden cattle car wooden excavator wooden hot rod wooden model wooden model build wooden model truck build wooden sub wooden tires wooden toy wooden toy build wooden toy truck wooden train wooden train car wooden train track wooden truck wooden truck body wooden truck build wooden wheels wrecker truck wrecker truck model ws tracker build
2M views 3K replies 115 participants last post by  GR8HUNTER 
#1 ·
Another toy BullDozer

Been playing with another wood toy project.
Bought and down loaded the plans for the Bull Dozer from Wood Store Net.
I was looking at the High Gear Dozer from Toys and Joys but you have to order the plans which is fine but I wanted to get started now not two weeks from now.

Well here's what I've got done so far.
Wood Engineering Building Machine Motor vehicle


Now I'm going to start at the Beginning. LOL
I'm building with Walnut I found while scrounging and Mahogany from a bed also found lumber.
The plans show a flat blade for the front but as I'm doing with a lot of this build I'm taking ideas from the Toys and Joys pictures and making this a little more of a show toy and not a kids play toy.
So I'm cutting out the center of the blade to make it more real to life.

To make the blade I clamped my sliding fence down and just tacked a angled fence to get the cut.
Fast and easy.
Wood Rectangle Hardwood Wood stain Tool


Wood Flooring Rectangle Floor Wood stain


Wood Flooring Floor Wood stain Hardwood


Once I get working I forget to take pictures, and I jump around a lot.
While the blades glued up and drying I worked on the base and as it was drying I built the cabin.
It's pretty cool in my shop so the glue is taking a lot longer to dry.
Wood Hardwood Wood stain Tool Publication


Wood Rectangle Hardwood Flooring Plywood


Now a little work on the cabin.
Wood Rectangle Font Gas Metal


Wood Flooring Rectangle Hardwood Wood stain


Wood Gas Hardwood Bumper Rectangle


I added the radiator because after I got the base and engine compartment built and started sanding it a large screw hole showed its ugly face so had to come up with a work around or start over, hey I love a good radiator so why not.

Automotive tire Wood Motor vehicle Gas Automotive wheel system




I used store bought wheels they look so much better.
The plans called for 1" wheels down below but Hobby Lobby didn't have any so I got 1 1/2" and made a jig and sanded them down to fit.
I hated to have to make the jig but once it was made the job went really fast and their all just right plus now I have the jig to make my own wheels if I need to.
The more I look at it the better the 1" wheels look.
The stock wheels would have looked like the bigger wheels these look different like their supposed to be there. lol

I would have loved to build the real tracks for this build like on the T&Y build but we'll save that for next time.
I still may buy the T&Y plans mainly for the tracks setup.

Wheel Wood Motor vehicle Automotive design Gas




Wood Engineering Building Machine Motor vehicle


That's all for now thanks for looking in.
 

Attachments

See less See more
30
#2,532 ·
Hi Track Dozer Building the ripper tine

I had it in my head I was done but after 3 days out of the shop I jumped back [or should I say crawled] into the shop and built the ripper tine.

It was pretty complicated but interesting.

Wood Lumber Composite material Flooring Engineering


Wood Creative arts Hardwood Wooden block Art


Wood Gas Engineering Auto part Machine


Wood Rectangle Hardwood Natural material Wood stain


Wood Creative arts Hardwood Art Artifact


Vehicle Wood Motor vehicle Combat vehicle Office equipment
 

Attachments

#2,533 ·
Hi Track Dozer Building the ripper tine

I had it in my head I was done but after 3 days out of the shop I jumped back [or should I say crawled] into the shop and built the ripper tine.

It was pretty complicated but interesting.

Wood Lumber Composite material Flooring Engineering


Wood Creative arts Hardwood Wooden block Art


Wood Gas Engineering Auto part Machine


Wood Rectangle Hardwood Natural material Wood stain


Wood Creative arts Hardwood Art Artifact


Vehicle Wood Motor vehicle Combat vehicle Office equipment
Very nice Bruce.
 

Attachments

#2,543 ·
Semi Truck T&J #2

Started on another semi truck, been thinking about building a trailer and thought it would be nice to have the truck ready for it.
Doing it this way I'll make all the tires at one time and they'll all match up, which has been a problem some times.
I never seem to make them the same way. :-[
Just some quick shots before I headed out the door.
Hand tool Wood Tool Metalworking hand tool Hardwood


Wood Engineering Hand tool Composite material Flooring


Wood Wooden block Hardwood Toy Plywood


Wood Rectangle Hardwood Wooden block Font


Wood Rectangle Creative arts Hardwood Flooring
 

Attachments

#2,544 ·
Semi Truck T&J #2

Started on another semi truck, been thinking about building a trailer and thought it would be nice to have the truck ready for it.
Doing it this way I'll make all the tires at one time and they'll all match up, which has been a problem some times.
I never seem to make them the same way. :-[
Just some quick shots before I headed out the door.
Hand tool Wood Tool Metalworking hand tool Hardwood


Wood Engineering Hand tool Composite material Flooring


Wood Wooden block Hardwood Toy Plywood


Wood Rectangle Hardwood Wooden block Font


Wood Rectangle Creative arts Hardwood Flooring
You are certainly well progressed in the build Bruce… looking good sir!!
 

Attachments

#2,553 ·
Semi Truck T&J #3

Got a little more done, and my cabinet shop friend gave my a bunch a walnut scraps so happy camper over here.
Wood Creative arts Hardwood Machine Plywood


Wood Rectangle Hardwood Table Bag


Wood Rectangle Creative arts Hardwood Scale model


Wood Creative arts Hardwood Wood stain Rectangle


Wood Rectangle Table Chair Outdoor furniture


Wood Gas Hardwood Plywood Art


Rectangle Wood Creative arts Beige Classic car


Wood Rectangle Art Audio equipment Hardwood


Wood Automotive design Font Art Toy


Motor vehicle Wood Table Automotive design Hood


That's it for today but it's coming along.
And thanks all for checking in and commenting.
 

Attachments

#2,554 ·
Semi Truck T&J #3

Got a little more done, and my cabinet shop friend gave my a bunch a walnut scraps so happy camper over here.
Wood Creative arts Hardwood Machine Plywood


Wood Rectangle Hardwood Table Bag


Wood Rectangle Creative arts Hardwood Scale model


Wood Creative arts Hardwood Wood stain Rectangle


Wood Rectangle Table Chair Outdoor furniture


Wood Gas Hardwood Plywood Art


Rectangle Wood Creative arts Beige Classic car


Wood Rectangle Art Audio equipment Hardwood


Wood Automotive design Font Art Toy


Motor vehicle Wood Table Automotive design Hood


That's it for today but it's coming along.
And thanks all for checking in and commenting.
Awesome looking forward to seeing the finished product!!
 

Attachments

#2,559 ·
Semi Truck 3.5

Again got a little more done.
Fixed up the front wheel wells and made the sleeper.
Tire Wheel Automotive tire Vehicle Motor vehicle

Wheel Tire Automotive tire Car Motor vehicle


Wood Motor vehicle Automotive design Art Engineering


And playing with a steerable front end, it may not work but its a fun experiment.
I kind a like it when the front tires are not pointed to the front, just adds that little extra.

These will probable be the front wheels I use but will need to make a ton a back wheels for truck and a trailer.

Wood Hardwood Plywood Natural material Circle


Tire Automotive tire Tread Wood Wheel


Been trying to come up with a way that the pivot point for the wheels is as close to the frame and tire as possible.
Wood Creative arts Engineering Hardwood Plywood
 

Attachments

#2,560 ·
Semi Truck 3.5

Again got a little more done.
Fixed up the front wheel wells and made the sleeper.
Tire Wheel Automotive tire Vehicle Motor vehicle

Wheel Tire Automotive tire Car Motor vehicle


Wood Motor vehicle Automotive design Art Engineering


And playing with a steerable front end, it may not work but its a fun experiment.
I kind a like it when the front tires are not pointed to the front, just adds that little extra.

These will probable be the front wheels I use but will need to make a ton a back wheels for truck and a trailer.

Wood Hardwood Plywood Natural material Circle


Tire Automotive tire Tread Wood Wheel


Been trying to come up with a way that the pivot point for the wheels is as close to the frame and tire as possible.
Wood Creative arts Engineering Hardwood Plywood
this is a very awesome way of doing the front suspension or turning im loving it thanks for sharing #4 ……. GREAT BLOG :<))
 

Attachments

#2,569 ·
Semi Truck 4.5 Steering and walnut frame

A few more pictures of the steering.
Wood Hardwood Plywood Thumb Fastener


The center grove was a mistake I went to deep for the first cut, and I will add that I cut the grove out while it was still square lumber and drilled the axle hole, then cut it round and sanded to fit on the drum sander jig.
Wood Automotive tire Hardwood Circle Auto part


Wood Finger Creative arts Art Auto part


Wood Tool Finger Art Hardwood

Tire Wheel Automotive tire Tread Synthetic rubber


Wheel Tire Automotive tire Light Tread


Wheel Tire Automotive tire Tread Wood


Tire Wheel Automotive tire Synthetic rubber Tread


Then it hit me I had some walnut so why not a walnut frame to go with the truck.
I hadn't really liked the white oak at least I think that's what it is, has the oak grain but way to white for the rest of the project, so I'll have a frame for some other build.

So here's the start of the walnut frame and I'm making a new rear end to go with it.
Wood Hardwood Wood stain Flooring Lumber


Wood Hardwood Rectangle Wood stain Plank


Wood Table Tool Workbench Hardwood


I know there's a hundred ways to get er done but this is what I've come up with for this build, so hope you all like it and if you have other ways, comment and show us your solutions. :-]

#4 over and out.
 

Attachments

#2,570 ·
Semi Truck 4.5 Steering and walnut frame

A few more pictures of the steering.
Wood Hardwood Plywood Thumb Fastener


The center grove was a mistake I went to deep for the first cut, and I will add that I cut the grove out while it was still square lumber and drilled the axle hole, then cut it round and sanded to fit on the drum sander jig.
Wood Automotive tire Hardwood Circle Auto part


Wood Finger Creative arts Art Auto part


Wood Tool Finger Art Hardwood

Tire Wheel Automotive tire Tread Synthetic rubber


Wheel Tire Automotive tire Light Tread


Wheel Tire Automotive tire Tread Wood


Tire Wheel Automotive tire Synthetic rubber Tread


Then it hit me I had some walnut so why not a walnut frame to go with the truck.
I hadn't really liked the white oak at least I think that's what it is, has the oak grain but way to white for the rest of the project, so I'll have a frame for some other build.

So here's the start of the walnut frame and I'm making a new rear end to go with it.
Wood Hardwood Wood stain Flooring Lumber


Wood Hardwood Rectangle Wood stain Plank


Wood Table Tool Workbench Hardwood


I know there's a hundred ways to get er done but this is what I've come up with for this build, so hope you all like it and if you have other ways, comment and show us your solutions. :-]

#4 over and out.
The walnut frame is way nicer than the oak, Bruce!

On the steering; are you going all the way and connecting it to the steering wheel??
 

Attachments

#2,572 ·
Semi Truck 4.5+2 Playing with some wheels

Figures I'd get started with the wheels.
Making 20 of them, 8 for the truck and 8 for a trailer and then 4 extras for another car or maybe the trailer needs 12 wheels?.
I already have my fronts.
Glued up a bunch a walnut scraps and then band saw them round, then drill out the centers, and need I say sand, sand, sand. LOL
Product Wood Adhesive Electrical tape Automotive tire


I left 1/8" to the back of the outside wheel center so the 1/4" axle holes will help line up the two tires for gluing up I will later drill out the center deeper so the rims can go in deeper and look more real.
Now we need to add some shape to the sides then off to the jigs for treading.
Tire Automotive tire Light Wheel Tread


Motor vehicle Wood Automotive tire Automotive exterior Machine tool


I need to put in a longer all thread so I can do more tires at one time.
I could have used my other jig which can do more but it's set up for 40 treads per tire and as these are smaller wheels I thought 36 treads would look better and be stronger.

Building Wood Ceiling Chandelier Ceiling fixture


Got to have some rims.
Wood Floor Flooring Table Machine tool


Tire Hood Automotive tire Wheel Tread


Automotive tire Wood Table Gas Motor vehicle


Automotive tire Tread Rim Tire Circle


So that's all for today, and thanks for checking the project out.

Check out my index for more wheel making how to's.
 

Attachments

#2,573 ·
Semi Truck 4.5+2 Playing with some wheels

Figures I'd get started with the wheels.
Making 20 of them, 8 for the truck and 8 for a trailer and then 4 extras for another car or maybe the trailer needs 12 wheels?.
I already have my fronts.
Glued up a bunch a walnut scraps and then band saw them round, then drill out the centers, and need I say sand, sand, sand. LOL
Product Wood Adhesive Electrical tape Automotive tire


I left 1/8" to the back of the outside wheel center so the 1/4" axle holes will help line up the two tires for gluing up I will later drill out the center deeper so the rims can go in deeper and look more real.
Now we need to add some shape to the sides then off to the jigs for treading.
Tire Automotive tire Light Wheel Tread


Motor vehicle Wood Automotive tire Automotive exterior Machine tool


I need to put in a longer all thread so I can do more tires at one time.
I could have used my other jig which can do more but it's set up for 40 treads per tire and as these are smaller wheels I thought 36 treads would look better and be stronger.

Building Wood Ceiling Chandelier Ceiling fixture


Got to have some rims.
Wood Floor Flooring Table Machine tool


Tire Hood Automotive tire Wheel Tread


Automotive tire Wood Table Gas Motor vehicle


Automotive tire Tread Rim Tire Circle


So that's all for today, and thanks for checking the project out.

Check out my index for more wheel making how to's.
Looking good.

I have pictures somewhere of a semi that had 44 tires. It was used to haul the tubes for the huge windmills that the energy farms use.

In Washington and Oregon we see many trucks with huge amounts of wheels. 24-30 is not rare at all.
 

Attachments

#2,582 ·
Semi Truck 8 Still playing with the wheels

Just about got them setup.
I changed the rims a little bit from the last post.
I still can't make up my mind if I'm going to ebanize them or not, the black looks good but it tends to hide all the work put into the treads.
Here's how I cut the treads.
With the stop block and the blade only raised 3/16" or so it's not a problem to slide the tire up against the fence, then when it hits the stop roll the tire into the blade to make the cut.
This is like all things wood working if it doesn't feel right for you don't do it, I could build a jig for this but for me the stop block is my jig.
Wood Automotive tire Wood stain Gas Hardwood


Automotive tire Wood Bumper Automotive exterior Wood stain


Please remember also I'm using a very thin blade.
Wood Floor Flooring Wood stain Hardwood


Tire Wheel Light Automotive tire Tread


Tire Wheel Automotive tire Tread Wood


Tire Wheel Automotive tire Tread Synthetic rubber


I've got 4, 5 hour days figuring out these wheels but they're about done thank you very much..
 

Attachments

#2,583 ·
Semi Truck 8 Still playing with the wheels

Just about got them setup.
I changed the rims a little bit from the last post.
I still can't make up my mind if I'm going to ebanize them or not, the black looks good but it tends to hide all the work put into the treads.
Here's how I cut the treads.
With the stop block and the blade only raised 3/16" or so it's not a problem to slide the tire up against the fence, then when it hits the stop roll the tire into the blade to make the cut.
This is like all things wood working if it doesn't feel right for you don't do it, I could build a jig for this but for me the stop block is my jig.
Wood Automotive tire Wood stain Gas Hardwood


Automotive tire Wood Bumper Automotive exterior Wood stain


Please remember also I'm using a very thin blade.
Wood Floor Flooring Wood stain Hardwood


Tire Wheel Light Automotive tire Tread


Tire Wheel Automotive tire Tread Wood


Tire Wheel Automotive tire Tread Synthetic rubber


I've got 4, 5 hour days figuring out these wheels but they're about done thank you very much..
I'm glad you decided against the ebonizing … I love them just like that … once you hit them with oil they will pop and come to life …. GREAT JOB :<))
 

Attachments

#2,593 ·
Semi Truck Bumper, mud flaps

With this build I keep making things and then come up with something else so if this keeps up I'll nearly have enough parts for a second truck. LOL
I came up with a different front bumper.

Was!

Wood Motor vehicle Automotive design Art Engineering


IS!!!

Wood Hardwood Wood stain Art Computer keyboard


Wood Hardwood Wicker Rectangle Basket


Wood Metal Machine Hardwood Auto part


Wheel Tire Automotive tire Vehicle Motor vehicle


Then on to the mug flaps.

Wheel Automotive tire Tread Motor vehicle Tire


Self-propelled artillery Combat vehicle Vehicle Tank Toy


Automotive tire Tire Wood Tread Font

I'm going to use two of my extra wheels for the front, not as pretty as the maple one's but will match up better.

Tire Wheel Automotive tire Vehicle Wood


Tire Wheel Automotive tire Motor vehicle Vehicle

Tire Wheel Motor vehicle Automotive tire Synthetic rubber


Tire Wheel Automotive tire Light Tread


That's it for this trip, hope you all liked them, and thanks for checking the truck out.
 

Attachments

#2,594 ·
Semi Truck Bumper, mud flaps

With this build I keep making things and then come up with something else so if this keeps up I'll nearly have enough parts for a second truck. LOL
I came up with a different front bumper.

Was!

Wood Motor vehicle Automotive design Art Engineering


IS!!!

Wood Hardwood Wood stain Art Computer keyboard


Wood Hardwood Wicker Rectangle Basket


Wood Metal Machine Hardwood Auto part


Wheel Tire Automotive tire Vehicle Motor vehicle


Then on to the mug flaps.

Wheel Automotive tire Tread Motor vehicle Tire


Self-propelled artillery Combat vehicle Vehicle Tank Toy


Automotive tire Tire Wood Tread Font

I'm going to use two of my extra wheels for the front, not as pretty as the maple one's but will match up better.

Tire Wheel Automotive tire Vehicle Wood


Tire Wheel Automotive tire Motor vehicle Vehicle

Tire Wheel Motor vehicle Automotive tire Synthetic rubber


Tire Wheel Automotive tire Light Tread


That's it for this trip, hope you all liked them, and thanks for checking the truck out.
I still like it. That 44 wheel rig I posted a picture of will use all your extra wheels too.
 

Attachments

#2,604 ·
Belly Dump Trailer #2

Got started yesterday on the Toys and Joys Belly Dump Trailer to go with my just finished semi.

The two main frame members are about the only thing that doesn't have some off the wall angle to it so it's making for an interesting build.

Aircraft Toy airplane Vehicle Wood Airplane


As you can see in the picture I glued up the outside of the frame and then added the bracing as I went.

I clamped the main brace to the table and as I added parts the glue would glue the parts together but also glue them to the copied plans so everything stay put as I built.

I made copy's of the parts with my printer and then cut out a brace held it to the wood and marked it a tad big then cut it out on the band saw, checked out what was needed and hit the disk sander to get the fine tuning.

And as always there's a hundred ways to get this done but this is what worked for me this trip.

Wood Rectangle Mesh Flooring Automotive tire


Wood Automotive exterior Gas Engineering Machine


Table Wood Rectangle Triangle Hardwood


Rectangle Wood House Stairs Window


Wood Vehicle Naval architecture Bumper Automotive exterior


Wood Rectangle Tire Hardwood Composite material


Wood Floor Flooring Gas Composite material

Wood Triangle Rectangle Table Hardwood


Wood Flooring Floor Rectangle Hardwood


Table Wood Triangle Hardwood Plank


Wood Table Automotive exterior Rectangle Hardwood


It's a long way from perfect but should serve the purpose for which it's intended when done.

If I ever build a bridge for something this frame would work a treat, a pain but a treat. lol
 

Attachments

#2,605 ·
Belly Dump Trailer #2

Got started yesterday on the Toys and Joys Belly Dump Trailer to go with my just finished semi.

The two main frame members are about the only thing that doesn't have some off the wall angle to it so it's making for an interesting build.

Aircraft Toy airplane Vehicle Wood Airplane


As you can see in the picture I glued up the outside of the frame and then added the bracing as I went.

I clamped the main brace to the table and as I added parts the glue would glue the parts together but also glue them to the copied plans so everything stay put as I built.

I made copy's of the parts with my printer and then cut out a brace held it to the wood and marked it a tad big then cut it out on the band saw, checked out what was needed and hit the disk sander to get the fine tuning.

And as always there's a hundred ways to get this done but this is what worked for me this trip.

Wood Rectangle Mesh Flooring Automotive tire


Wood Automotive exterior Gas Engineering Machine


Table Wood Rectangle Triangle Hardwood


Rectangle Wood House Stairs Window


Wood Vehicle Naval architecture Bumper Automotive exterior


Wood Rectangle Tire Hardwood Composite material


Wood Floor Flooring Gas Composite material

Wood Triangle Rectangle Table Hardwood


Wood Flooring Floor Rectangle Hardwood


Table Wood Triangle Hardwood Plank


Wood Table Automotive exterior Rectangle Hardwood


It's a long way from perfect but should serve the purpose for which it's intended when done.

If I ever build a bridge for something this frame would work a treat, a pain but a treat. lol
Looking good.

Way past both my skills and my patience too.
 

Attachments

#2,607 ·
Belly Dump Trailer #2

Got started yesterday on the Toys and Joys Belly Dump Trailer to go with my just finished semi.

The two main frame members are about the only thing that doesn't have some off the wall angle to it so it's making for an interesting build.

Aircraft Toy airplane Vehicle Wood Airplane


As you can see in the picture I glued up the outside of the frame and then added the bracing as I went.

I clamped the main brace to the table and as I added parts the glue would glue the parts together but also glue them to the copied plans so everything stay put as I built.

I made copy's of the parts with my printer and then cut out a brace held it to the wood and marked it a tad big then cut it out on the band saw, checked out what was needed and hit the disk sander to get the fine tuning.

And as always there's a hundred ways to get this done but this is what worked for me this trip.

Wood Rectangle Mesh Flooring Automotive tire


Wood Automotive exterior Gas Engineering Machine


Table Wood Rectangle Triangle Hardwood


Rectangle Wood House Stairs Window


Wood Vehicle Naval architecture Bumper Automotive exterior


Wood Rectangle Tire Hardwood Composite material


Wood Floor Flooring Gas Composite material

Wood Triangle Rectangle Table Hardwood


Wood Flooring Floor Rectangle Hardwood


Table Wood Triangle Hardwood Plank


Wood Table Automotive exterior Rectangle Hardwood


It's a long way from perfect but should serve the purpose for which it's intended when done.

If I ever build a bridge for something this frame would work a treat, a pain but a treat. lol
That's going to go perfect with the semi…
 

Attachments

#2,613 ·
Belly Dump Trailer #3.5

I'm down to fine tuning the look, but hadn't planned on a 12 wheel rear end so will need to make a couple more wheels.
The finish project is here.

Wheel Wood Window Tire Gas


Wood Gas Automotive exterior Bumper Tool


Wood Table Gas Engineering Electrical wiring


Working on the mud guards-fenders.
Wood Hardwood Table Flooring Plank


Wood Floor Flooring Hardwood Triangle
 

Attachments

#2,614 ·

Attachments

#2,619 ·
Toyota 4Runner #1

I keep telling myself I'm going to back off on the builds and then a project that has been rolling around in my head comes out to play.
I have owned two prerunners, [the non 4wheel drive taller trucks] and love the look, and feel of them.
So this will be a scratch build and hope I can pull it off as there is quite a bit more shape to these modern trucks.
Here's my testing of the waters to see if I'm up to the challenge.


I wanted the ribbed floor in the back of the truck so I guess a ribbed floor inside will work out too.







I know it doesn't look like much done but you got to start somewhere. lol
Here's what I'm using for my plans, they had to be blown up 200 percent to get a 2 3/4 tire size which tells me everything else is to the scale I want.

Please note


I need to go back and say I didn't scale it up by 200 percent, I went into the printers menu and found where you can print a poster of a picture and used the one that needed 9 sheets of paper to get the picture printed and then had to cut and paste to work it out**

 

Attachments

#2,620 ·
Toyota 4Runner #1

I keep telling myself I'm going to back off on the builds and then a project that has been rolling around in my head comes out to play.
I have owned two prerunners, [the non 4wheel drive taller trucks] and love the look, and feel of them.
So this will be a scratch build and hope I can pull it off as there is quite a bit more shape to these modern trucks.
Here's my testing of the waters to see if I'm up to the challenge.
Hood Automotive design Motor vehicle Vehicle Wood


I wanted the ribbed floor in the back of the truck so I guess a ribbed floor inside will work out too.

Wood Table Gas Engineering Automotive design


Automotive design Table Wood Engineering Desk


Vehicle Hood Automotive design Motor vehicle Wood


I know it doesn't look like much done but you got to start somewhere. lol
Here's what I'm using for my plans, they had to be blown up 200 percent to get a 2 3/4 tire size which tells me everything else is to the scale I want.

Please note


I need to go back and say I didn't scale it up by 200 percent, I went into the printers menu and found where you can print a poster of a picture and used the one that needed 9 sheets of paper to get the picture printed and then had to cut and paste to work it out**

Automotive parking light Car Land vehicle Vehicle Motor vehicle
htl, I'm on my 3rd model and I don't think I'm going to be able to stop building models. It's very addictive. Lol

Jason
 

Attachments

#2,628 ·
Toyota 4Runner #2

Been wanting to try this build for a long time but now I'm beginning to question my sanity, I needed an easy build not this thing. LOL

Wood Table Flooring Hardwood Desk


Wood Automotive design Flooring Font Hardwood


Wood Flooring Floor Font Beige


Hood Vehicle Car Motor vehicle Toy


Wood Floor Flooring Hardwood Rectangle


Wheel Vehicle Hood Car Wood


The top and windows aren't glued in just a look see as my passions was at an end and needed to call it a day.
Going to take some fine adjustment but should work out ok?

Vehicle Wood Car Automotive design Automotive exterior


Hood Motor vehicle Wood Toy Automotive design


And here's a picture of my truck. LOL
Automotive parking light Automotive side marker light Car Tire Land vehicle
 

Attachments

#2,629 ·
Toyota 4Runner #2

Been wanting to try this build for a long time but now I'm beginning to question my sanity, I needed an easy build not this thing. LOL

Wood Table Flooring Hardwood Desk


Wood Automotive design Flooring Font Hardwood


Wood Flooring Floor Font Beige


Hood Vehicle Car Motor vehicle Toy


Wood Floor Flooring Hardwood Rectangle


Wheel Vehicle Hood Car Wood


The top and windows aren't glued in just a look see as my passions was at an end and needed to call it a day.
Going to take some fine adjustment but should work out ok?

Vehicle Wood Car Automotive design Automotive exterior


Hood Motor vehicle Wood Toy Automotive design


And here's a picture of my truck. LOL
Automotive parking light Automotive side marker light Car Tire Land vehicle
No need to question your sanity - it's a bit off :)

On the other hand I sure enjoy watching your progress. Looks like you nailed the grain on that hood.
 

Attachments

#2,635 ·
Toyota 4Runner #3

Had to get the insides done before I could go any farther with the top.
Wood Hardwood Rectangle Plywood Engineering


Had some left over oak and walnut glued up so made the seats out of this odd ball wood.

Rectangle Wood Hardwood Font Plywood

Between the seat glue ups I worked on the wheel wells.
Hood Wood Toy Motor vehicle Automotive exterior

Then glue up the top and a ton a sanding would be in my future.

Wheel Car Hood Tire Vehicle


Wheel Hood Vehicle Car Truck


If I was to build another one I would leave more wood above the sides above the doors so the roof and sides would match up better.
With the older trucks and cars this usually isn't a problem because of the square sides but with these more modern builds with angled sides more material needs to be left at the top for shaping.

It's a long way from perfect but for a quicky scratch project not to bad I guess.
 

Attachments

#2,636 ·
Toyota 4Runner #3

Had to get the insides done before I could go any farther with the top.
Wood Hardwood Rectangle Plywood Engineering


Had some left over oak and walnut glued up so made the seats out of this odd ball wood.

Rectangle Wood Hardwood Font Plywood

Between the seat glue ups I worked on the wheel wells.
Hood Wood Toy Motor vehicle Automotive exterior

Then glue up the top and a ton a sanding would be in my future.

Wheel Car Hood Tire Vehicle


Wheel Hood Vehicle Car Truck


If I was to build another one I would leave more wood above the sides above the doors so the roof and sides would match up better.
With the older trucks and cars this usually isn't a problem because of the square sides but with these more modern builds with angled sides more material needs to be left at the top for shaping.

It's a long way from perfect but for a quicky scratch project not to bad I guess.
it looks pretty awesome to me I think your being to critical of your own work LOVING IT :<))
 

Attachments

#2,641 ·
Toyota 4Runner #4 Tail gate and sand sand sand

Toy Wood Automotive design Automotive exterior House


Rectangle Wood Scale model House Toy


Spent half my time playing with the front end figuring out how I want it.
Hood Wood Motor vehicle Automotive design Car


But at least most of the rest of the truck is under control.
Car Vehicle Hood Wheel Wood


House Wood Window Automotive design Art


Wood Rectangle Hardwood Flooring Automotive exterior


Just wondering what some wheels would do for it.

Wheel Tire Car Vehicle Automotive tire

I guess after the front end some mud guards are needed.
 

Attachments

#2,642 ·
Toyota 4Runner #4 Tail gate and sand sand sand

Toy Wood Automotive design Automotive exterior House


Rectangle Wood Scale model House Toy


Spent half my time playing with the front end figuring out how I want it.
Hood Wood Motor vehicle Automotive design Car


But at least most of the rest of the truck is under control.
Car Vehicle Hood Wheel Wood


House Wood Window Automotive design Art


Wood Rectangle Hardwood Flooring Automotive exterior


Just wondering what some wheels would do for it.

Wheel Tire Car Vehicle Automotive tire

I guess after the front end some mud guards are needed.
Moving right along in High style.
 

Attachments

#2,649 ·
Toyota 4Runner #5 Just about there

It's nearly there, I never thought I'd get around to building the truck out in the drive way but it's pretty close with a few custom extras.

Vehicle Car Hood Motor vehicle Table


Car Vehicle Wheel Automotive tire Tire


Car Vehicle Window Hood Motor vehicle


Hood Car Vehicle Motor vehicle Wheel


Vehicle Car Hood Wood Motor vehicle


I still need to come up with some wheels and finish sanding.
O! And add some axles. LOL

If any of you were wondering what the numbers in the title are for it's the number of days in the build and I consider 6 hr. as a day.
It will help me years from now to remember what it took to build it.
On some builds I loss count and don't add it.
 

Attachments

#2,650 ·
Toyota 4Runner #5 Just about there

It's nearly there, I never thought I'd get around to building the truck out in the drive way but it's pretty close with a few custom extras.

Vehicle Car Hood Motor vehicle Table


Car Vehicle Wheel Automotive tire Tire


Car Vehicle Window Hood Motor vehicle


Hood Car Vehicle Motor vehicle Wheel


Vehicle Car Hood Wood Motor vehicle


I still need to come up with some wheels and finish sanding.
O! And add some axles. LOL

If any of you were wondering what the numbers in the title are for it's the number of days in the build and I consider 6 hr. as a day.
It will help me years from now to remember what it took to build it.
On some builds I loss count and don't add it.
LOOKING AWESOME :<))
 

Attachments

#2,656 ·
Toyota 4Runner #7 Wheels

I've got two, 5 hour days in these wheel.
I was going to make two to match a set I had made earlier but they had 5 spokes per wheel and a 4Runner needs 6 spokes to get it right and it always pays to make an extra in case something goes wrong so I just made a set that will match up.
Plus their a little wider got to love wide tires. LOL
Table Wood Tablecloth Art Flooring


Automotive tire Tire Doily Wood Font


Tire Automotive tire Tread Wheel Rim


Car Tire Wheel Vehicle Motor vehicle


Wheel Tire Land vehicle Car Vehicle


Now I need to make some axles and all should be about done, or at least as far as I'm going with it.
Check out the finished project here.
 

Attachments

#2,657 ·
Toyota 4Runner #7 Wheels

I've got two, 5 hour days in these wheel.
I was going to make two to match a set I had made earlier but they had 5 spokes per wheel and a 4Runner needs 6 spokes to get it right and it always pays to make an extra in case something goes wrong so I just made a set that will match up.
Plus their a little wider got to love wide tires. LOL
Table Wood Tablecloth Art Flooring


Automotive tire Tire Doily Wood Font


Tire Automotive tire Tread Wheel Rim


Car Tire Wheel Vehicle Motor vehicle


Wheel Tire Land vehicle Car Vehicle


Now I need to make some axles and all should be about done, or at least as far as I'm going with it.
Check out the finished project here.
LOVE these tires and wheels they fit the pick up very well …. you are the tire and wheel expert …. jig made I assume … GREAT JOB :<))
 

Attachments

#2,664 ·
Hot Rod Mustang

Got started on a Mustang build.
I have seen tons of these cut out all the parts from a chunk a wood and glue it all together project plans but I have never tried to build a model this way so found some free plans and an giving this style of model [toy] building a look see.

Hood Wood Automotive design Flooring Automotive exterior


Wood Flooring Hardwood Engineering Font


The plans have marks for the axles so I drilled them out and as I put the thing together am using dowels in these holes to line everything up before I started gluing things up.

The plans tell you it's best not to sand the parts up as you go but after you glue it up,
but I glued up the center parts and then could sand the seats and dash and a light sand of the roof but will save all the out sides for a good shaping when all is glued up.

Hand tool Wood Tool Shotgun Metalworking hand tool


Wood Musical instrument Gas Machine Tool


One thing I will say, is it takes a large amount of full length lumber to cut it out where I usually can scrap something together out of smaller left over lumber.

It takes a different mind set to build this way but for a toy it would be heavy duty for sure.

Note he also has a lamborghini Miura plan that looks quite interesting, if I hadn't already had my mind and a friend saying something about a mustang, I would have built the Lamborghini instead..
 

Attachments

#2,665 ·
Hot Rod Mustang

Got started on a Mustang build.
I have seen tons of these cut out all the parts from a chunk a wood and glue it all together project plans but I have never tried to build a model this way so found some free plans and an giving this style of model [toy] building a look see.

Hood Wood Automotive design Flooring Automotive exterior


Wood Flooring Hardwood Engineering Font


The plans have marks for the axles so I drilled them out and as I put the thing together am using dowels in these holes to line everything up before I started gluing things up.

The plans tell you it's best not to sand the parts up as you go but after you glue it up,
but I glued up the center parts and then could sand the seats and dash and a light sand of the roof but will save all the out sides for a good shaping when all is glued up.

Hand tool Wood Tool Shotgun Metalworking hand tool


Wood Musical instrument Gas Machine Tool


One thing I will say, is it takes a large amount of full length lumber to cut it out where I usually can scrap something together out of smaller left over lumber.

It takes a different mind set to build this way but for a toy it would be heavy duty for sure.

Note he also has a lamborghini Miura plan that looks quite interesting, if I hadn't already had my mind and a friend saying something about a mustang, I would have built the Lamborghini instead..
Now you're talking Bruce - An iconic Ford Mustang …

PS - Thank you for the link, much appreciated!!
 

Attachments

#2,666 ·
Hot Rod Mustang #2

Now it's Glue clamp sand some parts.
Then it's Glue clamp sand some parts.
Then it's sand sand sand or if it sounds any better shape shape shape!!!
Wood Automotive design Hardwood Flooring Plywood


Tire Wheel Vehicle Hood Car


Hood Tire Vehicle Motor vehicle Car


Hood Vehicle Car Tire Automotive design


Hood Motor vehicle Automotive design Automotive exterior Wood


I don't feel like I have as much control over the build by doing it this way but it is a first so it may grow on me.
 

Attachments

#2,667 ·
Hot Rod Mustang #2

Now it's Glue clamp sand some parts.
Then it's Glue clamp sand some parts.
Then it's sand sand sand or if it sounds any better shape shape shape!!!
Wood Automotive design Hardwood Flooring Plywood


Tire Wheel Vehicle Hood Car


Hood Tire Vehicle Motor vehicle Car


Hood Vehicle Car Tire Automotive design


Hood Motor vehicle Automotive design Automotive exterior Wood


I don't feel like I have as much control over the build by doing it this way but it is a first so it may grow on me.
If you like these plans #4 Lloyds has tons of them

it is looking pretty good at first I was thinking ewww :<((( but now it dont look to bad :<))
 

Attachments

#2,677 ·
Caboose using Gatto plans #2

Got it in my head the the Reading train needs some cars so ordered the Gatto plans that match up with the train.
This will be my third caboose but all are completely different.
It also come with a Hopper car which will be a new type car for me, it also comes with a passenger car but it's I can't remember but it's way long so may build a cattle car instead down the road.

{I love to build cattle cars. LOL}
The project page for the Caboose is here.

I forgot to bring the camera with me the first day but you get the idea.
Product Rectangle Wood Font Material property


Wood Rectangle Font Material property Packing materials


Wood Rectangle Wooden block Font Plywood


Wood Hardwood Rectangle House Flooring


Building Wood Window House Rectangle


Wood Toy Urban design House Building


These windows take way to much time for my feeble nerves. LOL

Wood Ruler Office ruler Handwriting Font


I should point out that this caboose is quite a bit smaller than the Toys and Joys caboose so, the only real difference other than that is the Gatto gives details for the inside where the T&j doesn't but if you check out my blog on that model there's some ideas to fix that.
 

Attachments

#2,678 ·
Caboose using Gatto plans #2

Got it in my head the the Reading train needs some cars so ordered the Gatto plans that match up with the train.
This will be my third caboose but all are completely different.
It also come with a Hopper car which will be a new type car for me, it also comes with a passenger car but it's I can't remember but it's way long so may build a cattle car instead down the road.

{I love to build cattle cars. LOL}
The project page for the Caboose is here.

I forgot to bring the camera with me the first day but you get the idea.
Product Rectangle Wood Font Material property


Wood Rectangle Font Material property Packing materials


Wood Rectangle Wooden block Font Plywood


Wood Hardwood Rectangle House Flooring


Building Wood Window House Rectangle


Wood Toy Urban design House Building


These windows take way to much time for my feeble nerves. LOL

Wood Ruler Office ruler Handwriting Font


I should point out that this caboose is quite a bit smaller than the Toys and Joys caboose so, the only real difference other than that is the Gatto gives details for the inside where the T&j doesn't but if you check out my blog on that model there's some ideas to fix that.
That is going to be fabulous when finished.
 

Attachments

#2,687 ·
Hopper Car For Reading Train

Got started on the Gatto Hopper car yesterday.
Handwriting Wood Rectangle Hardwood Font


Handwriting Wood Rectangle Font Material property


Wood Finger Hardwood Rectangle Wood stain


Wood Rectangle Font Hardwood Wood stain


Wood Musical instrument Rectangle Hardwood Triangle


Wood Rectangle Font Table Wooden block


Wood Rectangle Flooring Hardwood Font


Product Wood Art Rectangle Beige


Finish project here.
 

Attachments

#2,688 ·

Attachments

#2,694 ·
Working on a Bob Cat Model

Started on the Toys & Joys Bob Cat model and wonders of wonders I brought the camera with me today.
This is another very simple but way fun model to build.

5 hours work in 12 seconds.



Font Material property Handwriting Parallel Pattern


Wood Font Hardwood Engineering Plywood


Wood Hardwood Plywood Wood stain Flooring


Wood Flooring Hardwood Wooden block Wood stain


Table Wood Desk Hardwood Wood stain


Table Wood Hardwood Flooring Font


Wood Automotive design Table Flooring Creative arts


Tried something a little different for the roof.

Handwriting Space bar Office equipment Office supplies Finger


Handwriting Font Material property Writing Rectangle


Wood Table Font Flooring Desk


Wood Flooring Font Hardwood Plywood


Wood Font Table Flooring Chair
 

Attachments

#2,695 ·
Working on a Bob Cat Model

Started on the Toys & Joys Bob Cat model and wonders of wonders I brought the camera with me today.
This is another very simple but way fun model to build.

5 hours work in 12 seconds.



Font Material property Handwriting Parallel Pattern


Wood Font Hardwood Engineering Plywood


Wood Hardwood Plywood Wood stain Flooring


Wood Flooring Hardwood Wooden block Wood stain


Table Wood Desk Hardwood Wood stain


Table Wood Hardwood Flooring Font


Wood Automotive design Table Flooring Creative arts


Tried something a little different for the roof.

Handwriting Space bar Office equipment Office supplies Finger


Handwriting Font Material property Writing Rectangle


Wood Table Font Flooring Desk


Wood Flooring Font Hardwood Plywood


Wood Font Table Flooring Chair
I have been through the factory, ran a few different ones, and even knew one of the original designers(BUILDERS).

You are doing a marvelous job. On a fantastic machine.

The very first ones were 3 wheels; but less than 1/2 dozen were ever made like that. The Kellers still own 2 of the originals.
 

Attachments

#2,704 ·
Working on a Bob Cat Model More done

Got some more done.
I love building these little construction tools.
Wood Flooring Automotive exterior Hardwood Triangle


Wood Rectangle Table Flooring Gas


Wood Rectangle Automotive design Flooring Creative arts


Wood Toy Architecture Flooring Engineering


Wood Rectangle Creative arts Hardwood Flooring


Wood Rectangle Automotive design Creative arts Hardwood


Wood Rectangle Automotive design Natural material Composite material


Wood Hardwood Flooring Rectangle Lumber


Wood Rectangle Flooring Composite material Hardwood


Wood Hardwood Flooring Table Tool


It's just about time to figure out some wheels?
 

Attachments

#2,705 ·
Working on a Bob Cat Model More done

Got some more done.
I love building these little construction tools.
Wood Flooring Automotive exterior Hardwood Triangle


Wood Rectangle Table Flooring Gas


Wood Rectangle Automotive design Flooring Creative arts


Wood Toy Architecture Flooring Engineering


Wood Rectangle Creative arts Hardwood Flooring


Wood Rectangle Automotive design Creative arts Hardwood


Wood Rectangle Automotive design Natural material Composite material


Wood Hardwood Flooring Rectangle Lumber


Wood Rectangle Flooring Composite material Hardwood


Wood Hardwood Flooring Table Tool


It's just about time to figure out some wheels?
That Bobcat is looking real good Bruce!!
 

Attachments

#2,716 ·
Chevy Corvette 1962

I know what your thinking, he's building another one but winter is just around the corner so won't be bothering you all much longer with my dribble.

Next is why the Chevy Corvette 1962, well I like the sting ray back end but wanted the open head lights, so the best of both worlds if your into the older Vets me thinks.
My first car was a 62 Chevy Impala, almost built that but the Vet first.

Here's the plans.
As usual this is made out of scraps. [poplar for this build] Only wide enough lumber I have at the time.
Vehicle Wheel Motor vehicle Hood Automotive lighting


Motor vehicle Hood Wood Automotive parking light Vehicle


Hood Vehicle Car Automotive design Motor vehicle


I had a small problem when I got to this point the stinken car wouldn't fit under my band saw to cut the front and back into shape.
I had to cut out as much as I could using the table saw at 45 degrees then just do a bunch a extra sanding on the 12" disk sander to get it done.

Wood Textile Interior design Car Automotive design


Wood Table Comfort Floor Flooring


Wood Comfort Automotive design Hardwood Flooring


Table Hood Wood Automotive design Automotive exterior


Comfort Automotive design Wood Bed frame Outdoor furniture


Wood Rectangle Linens Sleeve Pattern


By the time I get done it may not look or be a Corvette but it is a head scratchier for sure.
 

Attachments

#2,717 ·
Chevy Corvette 1962

I know what your thinking, he's building another one but winter is just around the corner so won't be bothering you all much longer with my dribble.

Next is why the Chevy Corvette 1962, well I like the sting ray back end but wanted the open head lights, so the best of both worlds if your into the older Vets me thinks.
My first car was a 62 Chevy Impala, almost built that but the Vet first.

Here's the plans.
As usual this is made out of scraps. [poplar for this build] Only wide enough lumber I have at the time.
Vehicle Wheel Motor vehicle Hood Automotive lighting


Motor vehicle Hood Wood Automotive parking light Vehicle


Hood Vehicle Car Automotive design Motor vehicle


I had a small problem when I got to this point the stinken car wouldn't fit under my band saw to cut the front and back into shape.
I had to cut out as much as I could using the table saw at 45 degrees then just do a bunch a extra sanding on the 12" disk sander to get it done.

Wood Textile Interior design Car Automotive design


Wood Table Comfort Floor Flooring


Wood Comfort Automotive design Hardwood Flooring


Table Hood Wood Automotive design Automotive exterior


Comfort Automotive design Wood Bed frame Outdoor furniture


Wood Rectangle Linens Sleeve Pattern


By the time I get done it may not look or be a Corvette but it is a head scratchier for sure.
Beautiful figure in the timber and fitting for such a nice car…
Great job Bruce!!
 

Attachments

#2,724 ·
Chevy Corvette 1962 plunge routing

Needed to get a hole in the nose so the radiator would be able to do it's job.
Haven't really done much plunge routing so had to put on the thinking cap for this simple job.
Table Wood Comfort Rectangle Hardwood


Comfort Wood House Table Flooring


Milling Wood Table Scientific instrument Machine tool


Plumbing fixture Rectangle Wood Bathroom Comfort


Table Wood Gas Machine Hardwood


Then shaped the edges and you guessed it sand sand sand.

Now I'm able to glue up the sides,and hope I haven't got ahead of myself doing it.

Wood Facial tissue Tool Hardwood Art


Hand Comfort Wood Finger Hardwood


Comfort Table Wood Bed frame Automotive design


no
 

Attachments

#2,725 ·
Chevy Corvette 1962 plunge routing

Needed to get a hole in the nose so the radiator would be able to do it's job.
Haven't really done much plunge routing so had to put on the thinking cap for this simple job.
Table Wood Comfort Rectangle Hardwood


Comfort Wood House Table Flooring


Milling Wood Table Scientific instrument Machine tool


Plumbing fixture Rectangle Wood Bathroom Comfort


Table Wood Gas Machine Hardwood


Then shaped the edges and you guessed it sand sand sand.

Now I'm able to glue up the sides,and hope I haven't got ahead of myself doing it.

Wood Facial tissue Tool Hardwood Art


Hand Comfort Wood Finger Hardwood


Comfort Table Wood Bed frame Automotive design


no
Mooi 4
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top