LumberJocks Woodworking Forum banner
7K views 27 replies 14 participants last post by  socrbent 
#1 ·
Starting the glue up

Automotive tire Table Wood Tire Desk


I am starting another pyrography turning project. This is a segmented vase that will have a pattern and small pictures burned as part of the design. We will see how it goes.
 

Attachments

See less See more
2
#2 ·
Starting the glue up

Automotive tire Table Wood Tire Desk


I am starting another pyrography turning project. This is a segmented vase that will have a pattern and small pictures burned as part of the design. We will see how it goes.
It is going to be a very time consuming project..Will be looking forward to seeing the results.
 

Attachments

#4 ·
Starting the glue up

Automotive tire Table Wood Tire Desk


I am starting another pyrography turning project. This is a segmented vase that will have a pattern and small pictures burned as part of the design. We will see how it goes.
Julian, that looks like some extremely intricate assembly work. I guarantee I would not be up to the challenge. I look forward to you showing us your final result. I'm certain it will be awesome.
 

Attachments

#6 ·
Top & bottom halves

Today I finished turning both halves and then glued them together. After the glue dried I finished turning the final shape and cleaned up the glue joint on the inside.
Wood Gas Machine Circle Engineering


Sensitive content, not recommended for those under 18
Show Content
Wood Gas Machine Auto part Automotive wheel system


Wood Gas Automotive wheel system Machine Engineering


Gas Machine Wood Composite material Musical instrument


Next step will be to layout the pattern for the wood burning design.
 

Attachments

#7 ·
Top & bottom halves

Today I finished turning both halves and then glued them together. After the glue dried I finished turning the final shape and cleaned up the glue joint on the inside.
Wood Gas Machine Circle Engineering


Sensitive content, not recommended for those under 18
Show Content
Wood Gas Machine Auto part Automotive wheel system


Wood Gas Automotive wheel system Machine Engineering


Gas Machine Wood Composite material Musical instrument


Next step will be to layout the pattern for the wood burning design.
Looks a bit too scary for me Julian, nice results just the same, I see you have some impressive tool setups.
 

Attachments

#9 ·
Drawing & burning the pattern

Spent a good portion of one day drawing and then burning the pattern on this vase.
The pattern is continuous around the circumference.

Artifact World Creative arts Pottery Art


Dishware Serveware Artifact Wood Porcelain
Those that have not tried to use a woodburning tool can NOT imagine the time and skill it takes! Looking great!
 

Attachments

#18 ·

Attachments

#27 ·
Applying the sealer

This will be the last entry for this blog. Today I applied some sealer; inside and out.
Next steps will be to sand with 400 grit and spray a satin finish.
Musical instrument Automotive tire Wood Brass instrument Audio equipment


Wood Creative arts Artifact Art Natural material
Couldn't help it had to make it right!!!
SO nicely done!

World Pottery Art Wood Artifact
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top