LumberJocks Woodworking Forum banner

Project Information

Left Wing is 4ft, Right Wing is 3ft.
Top is 1/2 plywood w/ 1/2 plywood glued & nailed on both sides of T-Track.

Wings sit on Cart, and fit tight over the cleat(?) pocket screwed down to the cart. I ran a 5/16" T-Knob/Bolt thru leg / top assembly so the legs move with the top.

Made adjustable legs for probably no apparent reason, but on pic 3 - I added sandpaper between the adjustable legs to give it lots of friction… won't slip.

Gallery

Comments

· Registered
Joined
·
2,242 Posts
Great Miter Saw project, thank you for sharing. Like the way you used the cleats for the tables
 

· Registered
Joined
·
16 Posts
Great idea with the sandpaper and it's cheap/easy to replace if it gets smashed up.
 

· Registered
Joined
·
9 Posts
nice design. Very sturdy looking and very functional.
 

· Registered
Joined
·
13 Posts
Before I added the sandpaper I would just put a easy hand clamp near the bottom of the leg lap, but I caught way too much crap from my brother.
 
Top