LumberJocks Woodworking Forum banner

Project Information

I recently bought a small dedicated CNC machine for one of my products.
It is a table top model but it didn't have a table so this is what I came up with for it.
It is all from scrap 3/4" maple ply and 3/4 mdf. the top is a sheet of 1" that I bought for almost nothing because the corner was broken off. It just so happened that I didn't need that corner anyway.
Everything is keyed together for strength.

Gallery

Comments

· Registered
Joined
·
10 Posts
Great job! I'm sure that salvaged table will come in real useful for you in the future!
 

· Registered
Joined
·
876 Posts
I see you big CNC made the parts for his little brother, neat M and T's.
That sucker is gonna hold anything you put on it.
 
Top