LumberJocks Woodworking Forum banner

Project Information

Made from the scrap pile.
Sides and bottom are 1/2 ply. (Table project)
Tool holder from 1x material. (Bookcase project)
Handle is from a 2×4. (Workbench project)
Rope. (Just in the shop)
Rope handle brackets are from salvaged oak flooring. (Neighbor's trash. Now they ask before they put wood in the trash.)
Tray and tray runners are resawn 1x material. (Shadowbox project)
Tray bottom 1/4 ply. (Shadowbox project)

Graphics were printed on laser printer and put on with laquer thinner. (Unlimited possibilities)

Finished with 2 coats of spray poly.

Gallery

Comments

· Registered
Joined
·
429 Posts
Great use of off-cuts. You turned scrap into a very handy little tote. Nice one
 

· Registered
Joined
·
21 Posts
One of the nicer and more useful looking totes I've seen.
 
Top