LumberJocks

ccarrington's Blog

  • Advertise with us
This blog is written by ccarrington | 10 entries so far

Latest Entry

Key Largo Carolina Dory Build #10: Sidewalls and Cap

11-04-2017 02:56 PM by ccarrington | 1 comment »

he sidewalls are attached to the ribs with glue and screws and bent into shape. they are made from 3/8” plywood. They will get one coat of glass after fairing and sanding. The cap has 1×4 lumber bent to the hull on both the inside and outside. The tops are made from 3/4” plywood cut into sections and hen planed and sanded to shape. They are all filled, sanded, and epoxied. coming along nicely. for now i am leaving the back 2 feet of boat unfinished until figure out my engine install, where will need to put through hull fittings, drains, plugs, ect. tat is the tricky part to me. next will be building out the pilot house and sta...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com