Joe Watson's Blog

  • Advertise with us
This blog is written by Joe Watson | 35 entries so far

Latest Entry

Turning #2: 4 in 1 Screwdriver

01-12-2014 02:58 AM by Joe Watson | 3 comments »

CapnEddie a user on youtube did a video on 4 in 1 screwdrivers. He took a cheap 1.99 home depot unit and broke off the plastic handle from the metal inside. He then turned a new screwdriver to fit the old screwdriver. I started by putting the piece on my lathe and using a bowl gouge turning off the plastic handle After that I have a kit with a metal piece that needs to be epoxied in after you turn the handle. I drilled in two steps first drilling a whole to accomadate the length of the screwdriver parts. Then a larger hole just deep enough to accomadate the little metal part. The rest is turned like any other tool handle turning a step to incorporate a ferrel. I used boiled ...

Read this entry »

Older Entries

View all 35 entries »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics