Shop Shots

  • Advertise with us
Blog series by Brian Havens updated 08-25-2010 05:22 PM 5 parts 6128 reads 21 comments total

Part 1: Final Pass

07-17-2010 01:49 AM by Brian Havens | 5 comments »

I got the itch to do a little photography (one of my past hobbies) in the shop. The wood is spinning at about 1000 rpm.

Read this entry »

Part 2: Cutting Air

07-18-2010 01:19 AM by Brian Havens | 7 comments »

The wood is spinning at about 800 rpm

Read this entry »

Part 3: The Best Part of Waking Up...

07-18-2010 06:10 PM by Brian Havens | 5 comments »

... is shavings in your cup! After finishing my morning espresso, I set the cup down next to my lathe. This is what it looked like about an hour later. It reminded my of a joke that my friend and fellow LumberJock Todd Clippinger tweeted to me.

Read this entry »

Part 4: "Sparks"

07-19-2010 05:00 PM by Brian Havens | 2 comments »

Putting a new edge on one of my favorite bowl-making tools: the 3/8” bowl gouge that I use for finishing cuts.

Read this entry »

Part 5: Photography from the Shop

08-25-2010 05:22 PM by Brian Havens | 2 comments »

Although my daily Shop-Shot is automatically tweeted every day (@brianhavens), I have had not had time to post it (manually) every day here on LumberJocks. As such, I put together a page showing all my recent shots for my LumberJocks pals: Let me know what your favorites are.

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics