The Straightedge (video) #5: Making Cove Moulding (on the table saw)

  • Advertise with us
Blog entry by Brian Havens posted 07-13-2011 03:49 AM 6242 reads 10 times favorited 21 comments Add to Favorites Watch
« Part 4: Turning Urban Lumber Part 5 of The Straightedge (video) series no next part

Whaoo!! Well it has been about a year since I have been able to make a Straightedge video, and now the new one has finally arrived. Enjoy:

This video is also available on my web site: Cove Moulding

-- Brian Havens, Woodworker

21 comments so far

View dakremer's profile


2771 posts in 4382 days

#1 posted 07-13-2011 04:05 AM

Brian – one of the best videos i’ve seen here on Lumberjocks! The videography was great! The google sketchup explanations were even better! You must have spent so much time on this!! i really enjoyed it a lot!!!

WOW! Thanks!

-- Hey you dang woodchucks, quit chucking my wood!!!!

View MShort's profile


1798 posts in 4709 days

#2 posted 07-13-2011 05:19 AM

Thank you so much for such a detailed video on cove mouldings. I have never made these but this clears alot up on the subject and I may have to try it out. I really like the emphasis on SAFETY that you put into this video. Well planned and well executed.

-- Mike, Missouri --- “A positive life can not happen with a negative mind.” ---

View live4ever's profile


983 posts in 4300 days

#3 posted 07-13-2011 05:42 AM

Great video! I love the “ride-along” shots, lol.

-- Optimists are usually disappointed. Pessimists are either right or pleasantly surprised. I tend to be a disappointed pessimist.

View MNWOODWORKER's profile


105 posts in 4875 days

#4 posted 07-13-2011 07:20 AM

I agree with dakremer, great video!!I loved every aspect of it and sure hope we don’t have to wait another year!

View gbear's profile


544 posts in 5389 days

#5 posted 07-13-2011 07:40 AM

Great video Brian…lots of good information presented clearly and concisely. Well done.

-- gbear, Carmichael, CA

View Scott Bryan's profile

Scott Bryan

27249 posts in 5112 days

#6 posted 07-13-2011 01:09 PM

Brian, this is certainly a first class video that explains the process well. I am familiar with the technique but had not considered simply ripping the molding into two halves and using 8/4 stock. These look to be a couple of great tips.

Thanks for taking the time and effort to produce the video.

-- Challenges are what make life interesting; overcoming them is what makes life meaningful- Joshua Marine

View Sanity's profile


176 posts in 3980 days

#7 posted 07-13-2011 02:01 PM

Thank you Brian – great quality video.

-- Stuart

View karlhead's profile


6 posts in 3983 days

#8 posted 07-13-2011 03:18 PM

Great video – Brian

enjoyed content and presentation

View Stevinmarin's profile


838 posts in 4366 days

#9 posted 07-13-2011 03:35 PM

Well done! I really like those POV shots at the end. Too cool!

-- Entertainment for mere mortal woodworkers.

View Rj's profile


1047 posts in 4921 days

#10 posted 07-13-2011 05:49 PM

Job Well Done Brian !!!
I can tell alot of thought and time went into this!! I don’t think anyone has put out a better instructional video than this one ! I sure hope you start putting out a series of videos soon …...

Fine Wood Working magazine I hope your paying attention because if you don’t hire this guy SOMEONE will !!!!!!!!

-- Rj's Woodworks,San Jose & Weed Ca,

View Paul's profile


226 posts in 4742 days

#11 posted 07-13-2011 05:58 PM

professional video

View ratchet's profile


1391 posts in 5077 days

#12 posted 07-13-2011 07:03 PM

Brian; Absofreekinlootely awesome! You need to figure a way to make some loot off of these. Your production quality and instruction is better than the last 2 ww dvd’s I paid for.
Thank you for sharing your work with us!

View nailbanger2's profile


1041 posts in 4434 days

#13 posted 07-13-2011 07:49 PM

Echoing everyone elses comment, great job. Oreo is my cat’s name, and probably for the same reason as your dog.

-- Wish I were Norm's Nephew

View MOJOE's profile


571 posts in 4559 days

#14 posted 07-13-2011 08:24 PM

Awsome vid, and the “tools eye view” shots at the end were great!

-- Measuring twice and cutting once only works if you read the tape correctly!

View TheOldTimer's profile


226 posts in 4376 days

#15 posted 07-13-2011 09:07 PM

Brian: Excillent video and instructional material. No annoying loud music or commical content. Thanks very much for your effort, we need more videos like yours.

-- TheOldTimer,Chandler Arizona

showing 1 through 15 of 21 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics