LumberJocks

brianb6603's Blog

  • Advertise with us
This blog is written by brianb6603 | 3 entries so far

Latest Entry

Small workbench based on shipbuilt's Short Block V8 (Workbench Challange) #3: Leg stretchers, assembly bolts and bottom shelf.

03-21-2015 05:15 PM by brianb6603 | 4 comments »

This part was very straight forward, The stretchers were assembled from 3 strips of 3/4” BB glued together with Biscuits to help keep everything aligned. The center strip is 1/2” longer to make a tendon. Next I made a router template to make the mortises in the legs. At that point it was just a matter of laying them out and cutting them. While I had the legs out I needed to make clearance slots for the 2 dog holes on each side of the left side leg. Test fitting. This bench needs to be able to be disassembled (it is bigger than my entry door). As before I was looking at the Benchcrafted parts but did not want to pay the price asked. I...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com