My Shooting Board

  • Advertise with us
Blog series by Bob #2 updated 02-06-2008 12:36 AM 1 part 9355 reads 13 comments total

Part 1: Another method for making this handy tool

02-06-2008 12:36 AM by Bob #2 | 13 comments »

After seeing the neat job that MOT/ Tom did with his shooting board I was enticed to make one of my own.I am in the middle of milling some wood for small boxes so I will needed something to handle these small gauge materials.I am a pack rat and wood hoarder by genetic make up so when I dug through one of my precious piles of scrap I found an old poplar plywood shelf, a piece of arborite (Tom’s idea) and a piece of 3/4” fir flooring plywood.The rest were off cuts of oak walnut etc ...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics