LumberJocks

Woodworking blog entries tagged with 'wooden toy truck wheels'

  • Advertise with us
View George_SA's profile

A Dump Truck Adventure #10: Wheels 02

01-12-2019 04:39 PM by George_SA | 2 comments »

The next step is to cut the wheels on the bandsaw. I used my Bandsaw circle cutting jigThe inspiration for this jig came from this YouTube video. My jig differs from his as I made my jig for making toy truck wheels, but I used his basic idea to design my jig.The SketchUp plan for my jig is available over here I also added a venire scale to help cutting very precise circles. I used SketchUp to make the printable venire scales To calibrate the scale I cut a wheel and measured th...

Read this entry »


View George_SA's profile

A Dump Truck Adventure #9: Wheels 01

01-12-2019 02:43 PM by George_SA | 0 comments »

I made a few jigs for making the wheels 1st I made the wheel blanks 10×50 x 50mm for this truck. My final wheel size is 44mm diameter. I marked 1 corner for consistency on the drill press. All the blanks for the wheels plus a few spare Mark the centre of the blank. I only mark one to set up the drill press. The set up in the drill press with a stop block against the drill press fence. I used a 25mm Forstner bit to drill the holes for the centre hub. Then I drill the axl...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com