LumberJocks

Woodworking blog entries tagged with 'wooden bar clamps'

  • Advertise with us
View George_SA's profile

An exercise in making wooden bar clamps #3: Back post

09-15-2012 07:01 PM by George_SA | 1 comment »

First I cut the mortise and tennons A nice tight fit thanks to my kerfmaker A 25mm hole for the nut and a 16mm hole (not shown) for the threaded rod. Six nuts pinned to the threaded rods The nut is press fitted into the hole A test dry fit The problem with the hinge holes from the door post fixed Previous blogs1) The bar and front jaw2) Securing the nut for the front jaw4) Back jaw

Read this entry »


View George_SA's profile

An exercise in making wooden bar clamps #1: The bar and front jaw

09-12-2012 12:10 PM by George_SA | 11 comments »

You can never have enough clamps, right? I have an odd assortment of bar clamps, including some homemade clamps I made from 25mm (1 Inch) square tubing and a few wooden clamps that work with wedges. I also have some cheap pipe clamps of which the back jaw keeps on slipping under the clamping pressure. The other day I stumbled across this YouTube video i.r.o. homemade heavy duty wooden bar clamps. I drew some plans to get started And so the journey begins.I started ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com