LumberJocks

Woodworking blog entries tagged with 'woodcraft'

  • Advertise with us
View gervase's profile

A BIG table at Furzey Gardens Hampshire

05-17-2012 09:58 PM by gervase | 0 comments »

I went out earlier this week with my wife, without our satnav, to visit a lovely garden we had visited about 2 years ago. We knew it was in the New Forest but I had forgotten the route we had taken before. Any way we set off & found a garden really easily but as we entered realised it was the wrong one !! Never mind It was a treasure with Azaleas & Rhododendrons in wonderful bloom, my wife was in her element & then I spotted something under a thatched roof. Anyway I’ve...

Read this entry »


View Randy's profile

Plans to start more woodworking

08-03-2011 03:09 PM by Randy | 2 comments »

The few projects that I have made since purchasing the Woodcraft store in Tucson have been for my son, Lucio, who is three years old. Between running the store and spending time with him and my wife, I don’t have much time for woodworking. I hope to incorporate more woodworking into my days real soon.

Read this entry »


View prometej065's profile

marquetry technique #2: Fascination with the beauty of wood..

07-02-2011 03:27 AM by prometej065 | 6 comments »

I did not want a classical framework for my latest miniature marquetry motifs ..Eros in the fingers… http://lumberjocks.com/projects/49521Suburbium Petrovaradiniense… http://lumberjocks.com/projects/49796 Did I succeed .. I do not know ..I only know that it was magical attractive idea to redeem a walnut stump from my yard ..

Read this entry »


View WayneC's profile

Playing Around with Carving #4: Carving Class

06-27-2011 04:33 AM by WayneC | 22 comments »

Today I took an introduction to relief carving class at the local Woodcraft store. The class was focused on carving an oak leaf and acorns using a piece of Basswood. This was my first experience at relief carving. I am an absolute beginner. I have to say I really enjoyed this and will be setting time aside to carve as much as I can. I would also say I have extreamly happy with the Ashley Iles carving chisels. They arrived sharp, are very substantal and they cut basswood like a hot kn...

Read this entry »


View swamps42's profile

Scroll sawing #1: Ordering a New Saw

06-05-2011 04:29 AM by swamps42 | 6 comments »

I did it today. I went into Woodcraft, I admired the floor models of scroll saws, and then I bit the bullet. I ordered the 21” Excalibur. I should arrive Friday. I took out a loan from my best friend so I could buy the saw now, instead of in 6 months. This way I’ll be able to start using it now and have a HUGE stock of yarn bowls and ornaments for the holiday sales I’m a part of. Guy pal, who I borrowed the money from, was really sure I should get the Dewalt and save 300 ...

Read this entry »


View MyGrowthRings's profile

Woodcraft's New WoodRiver V3 #4 Smoothing Plane Reveal video

11-24-2010 12:57 AM by MyGrowthRings | 9 comments »

I’m calling this a reveal rather than a review, because quite frankly I’m not the guy you want reviewing hand planes. You see, I’m a power tool guy, but as I mention in the video, I’m starting to fall back in love with hand tools. In recent months I’ve been researching planes and while there are some incredible planes available from Lie-Nielsen and Lee Valley, I just couldn’t bring myself to part with that much of my hard earned cash. Enter the new Woodc...

Read this entry »


View Ryan Corrigan's profile

Beaded Face Frame Demo

06-23-2010 01:33 PM by Ryan Corrigan | 1 comment »

If any LJ’s will in or around Lexington, KY Sat. June 26, I will be demoing the new Kreg Beaded Face Frame Jig at Woodcraft in Lexington at 10am, 1pm, and 3 pm. Stop bye if you are in the neighborhood.http://www.kregtool.com/Precision-Beaded-FaceFrame-System-Prodview.htmlhttp://www.woodcraft.com/stores/store.aspx?id=582

Read this entry »


View Martin Sojka's profile

LJ Woodworking Awards - Summer 2010 #1: Announcement

06-21-2010 07:53 PM by Martin Sojka | 8 comments »

It’s time to let the creative juices flow again! Thousands of LumberJocks, five sponsors, a whole bunch of amazing prizes and one category. That’s the summary of our LumberJocks Woodworking Awards Summer 2010. Our goal is, as always, to highlight the creativity of all woodworkers – regardless of skill level – through the use of materials that are available to all. So here is the Summer 2010 topic: Fluidity – “Like grasses swaying in a summer breeze, the fl...

Read this entry »


View ackychris's profile

My Woodcraft experience

05-28-2010 06:46 AM by ackychris | 14 comments »

I was just thinking that it’s pretty easy to slam a company when they screw up, but when they get it right it often goes unmentioned. Woodcraft, here’s to you. In case you don’t get to the end of this post, the moral of the story is that Woodcraft (online, not local) totally came through for me. I’ve ordered a few things from Woodcraft, and never had a problem. There aren’t any woodworking stores within two hours of where I live (unless you count the BORG&#...

Read this entry »


View reggiek's profile

Woodcraft sale on Nova Chuck

12-04-2009 09:22 PM by reggiek | 2 comments »

In case any of you turners are looking for a chuck to use on your lathe….This one is at a great price…plus it includes 2 jaws and a wood center screw. I have the supernova II on my big lathe…and now one of these on my Jet mini….the jaws are interchangeable and now I don’t have to keep switching chucks and jaws so much….....and the price was better then the grizzly or the PSI chucks….all of which have their plus’s and minus’s…..but m...

Read this entry »


« prev 1 2 3 4 next »
37 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com