Woodworking blog entries tagged with 'wood screw'

  • Advertise with us
View schu777's profile

Building my wooden Screw #4: The Dowel to become the wood screw (I hope)

12-07-2016 09:44 PM by schu777 | 0 comments »

After having the guide created for the wood screw, I needed to create the dowel that would become the wood screw. This dowel was created out of the birch wood I had from a shelf. I’m not an expert on the lathe, but decent enough to get it moving. After getting the dowel close to the 2.5” size, I’d take it off and see if it would fit through the 2.5” hole – go back and remove just a hair off here and there. I finally got it to the size and moved towards the next ...

Read this entry »

View schu777's profile

Building my wooden Screw #3: Creating the Guide for the Wood screw (version 2)

12-07-2016 08:54 PM by schu777 | 0 comments »

Now in the first version I planned on making just a thread box, but decided to go use a router instead. In this picture the small block on top with dowels coming out of it is sitting on top of the block that will be the 2.5” guide for the wood screw. The top block will become the “nut” that pulls the screw through as the router is cutting the threads. The dowels were used to hold both pieces together while I drilled in a 2” hole first, which then I followed up with ...

Read this entry »

View schu777's profile

Building my wooden Screw #1: Guide block for the tap...

12-07-2016 06:06 PM by schu777 | 0 comments »

Next I created the guide block for the tap (for the second time) in this picture you can see the block with a 2” hole and my paper template laying on top. The black on the metal is the part that will be used to guide the tap and create the nut. The wood I used was from an old shelf that I build when I was in high school – birch. In front is the LONG tap that I created out of popular. Yes, I know, not the greatest wood to use in creating my wooden screw jigs. On the right side...

Read this entry »

View schu777's profile

Building my wooden Screw #2: The Beginning...

12-07-2016 05:02 PM by schu777 | 0 comments »

As with everyone in the past 2-3 years, I started down the path to build my workbench which I wanted to have some wooden screws for the wagon vise and leg vise. I looked around to purchase some and realized that the price alone was reason enough to pursue building my own wood screw vise. So my search began with Google searching for how to do it. Luckily I came across CartersWhittling that gave me tons of information of how to build a screw. If you are looking to go down this path of build...

Read this entry »

View sandhill's profile

Work Bench #2: I have been busy building a new work bench

04-11-2013 01:14 AM by sandhill | 9 comments »

In between jobs I have been building a new work bench milled from 8/4 and 12/4 maple hard and soft. The top is 4” thick. 24” wide, 6’6” long the legs are 4”X5” and the bench is 33” high which is at the point where my wrist makes a crease. The wagon vice is from Lake Erie Tools as will be the leg vice. I am building it by hand with no power tools at all, Whew! I still need to mount the leg vice after all the stretchers are cut, 16 mortise & ten...

Read this entry »

« prev 1 2
15 entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics