LumberJocks

Woodworking blog entries tagged with 'white pine'

  • Advertise with us
View DustyMark's profile

Building a KARA Hummer Layout Duck Boat #1: Building the Lower Frame

05-11-2015 07:00 PM by DustyMark | 6 comments »

The Requirement I moved back to MN in June 2014, after nearly 30 years away, and my brother quickly introduced me to duck hunting. We’re not on any of the major flyways here, so we need to put everything in our favor possible. We read about the advantages of layout boats in providing maximum concealment from wary ducks and talked about it in the duck blind all last season. Our hunting party consists of my brother, my nephew, and me and we decided to build three one-man layout boat...

Read this entry »


View robbinscabin's profile

How to finish a log bed? No, Really...How do I finish it?

05-02-2011 06:22 PM by robbinscabin | 31 comments »

Since we’ve started a business, North Country Rustics (find me on Facebook) we’ve been very busy but we’ve also tried to take our projects to a new level. We’ve made several log beds (eventually, we even began making the bed frames from log~even though I wimped out on my son’s bed) but we are currently working on our first log bed for sale. The queen sized bed is really our best work yet but we’re stumped when it comes to how we should finish it. We re...

Read this entry »


View CartersWhittling's profile

Tool Chest #1: Design and Materials

01-17-2012 08:06 PM by CartersWhittling | 10 comments »

Hello. I have decided to start work on my new chest tool. I am not sure when I will get around to starting the build, but I have got the design and materials ready for when it comes time to begin. I bought the book by Chris Schwarz “The Anarchist’s Tool Chest” back in the early parts of summer http://www.leevalley.com/en/wood/page.aspx?p=67610&cat=1,46096,46109. I have always enjoyed reading his blog and when my friend told me about the premise of the book I though...

Read this entry »


View Mike Chapman's profile

White Pine Log Cabin

08-23-2010 11:44 PM by Mike Chapman | 23 comments »

On July 10, 2010 I began to build my log hunting cabin. It starts with harvesting blown down white pine. We had a horrendous wind storm two years ago that left millions of board feet of timber in ruins. We put some it to good use. Go to my website and navigate to “Work-In-Progress”. There you will see the White Pine hunter’s cabin being created from logs, to lumber, to rough cabin, and finally, to finished cabin. I’m building the log cabin right outside of my woo...

Read this entry »


View CartersWhittling's profile

Tool Chest #2: Starting the Shell

05-02-2012 02:44 AM by CartersWhittling | 13 comments »

Hello. I happened to have little work today, so I had time to do some work on the tool chest. A few weeks ago I had skip planed all the parts for the shell, and some of the oak. Skip planing is simply using a heavy set plane to remove the twist and warpage in a board. Thats all. You do not use a try plane or smoother at this point. By skip planing the lumber before hand, the lumber has a second chance to warp if it has to, since there was fresh wood removed from both faces. Now a...

Read this entry »


View naomi weiss's profile

My Roubo Build #1: Getting the Lumber

03-18-2010 10:42 AM by naomi weiss | 9 comments »

So it’s finally happened! Of course, the day before i read that the Schwarz is coming out with another workbench book, this one more hand-tool-apartment-dweller-friendly, but no matter :-/.The lumber has been ordered and picked up. I know it’s premature to thank ppl for helping me build a workbench when all i have is a pile of lumber, so for now, i suppose i would like to mention that there are two people without whom i could not have a pile of lumber that is hopefully soon to be ...

Read this entry »


View naomi weiss's profile

My Roubo Build #7: Some Considerations Along the Way, or a Cry for Help

05-17-2010 06:55 AM by naomi weiss | 18 comments »

As i have been building this thing, i have had my nose in the Schwarz’s book. However, i cringed when during my review i read this: Once you look at the characteristics that make a species good for a workbench, you see that white oak, Southern yellow pine, fir, poplar or just about any species (excepting bass wood and the soft white pines) will perform brilliantly. (p.14) And for some salt in the wound: Anyone who has purchased a white pine 2×4 bench from a home center can...

Read this entry »


View ruddhess's profile

Japanese Tool Box #1: Cutting Sides & Square Tenons

04-05-2015 01:23 PM by ruddhess | 2 comments »

I actually broke down and sharpened the blade on one of my crappy (not the crappiest, next one up) little block planes. Made some shavings. Not exactly the right tool for the job and the blade wasn’t dull anymore, just not as sharp as it needed to be. Resorted to a bit of hand sanding with a block and some 120 grit. Inching my way toward ‘real’ woodworking! I am going to do some square mortise/tenon joints for the ends of the box. This time, I am doing it “rightR...

Read this entry »


View ruddhess's profile

Japanese Carpentry Tool Box 第 #2: Cutting Mortises & Fitting Up

04-22-2015 02:19 AM by ruddhess | 0 comments »

Marking out the mortises – shallow chisel cuts on outside edges and nail punch the center so forstner bit will center correctly. 3/4” Forstner bit works well. Chopping the corners out with a 3/4” chisel. Works well. Close-up of one mortise at the beginning cuts. Initial fit for the first set of mortises. Pictures of the mortise/tenon fit. Much better (less gaps) than the first box I made recently. Inside corner. Outside corner. One...

Read this entry »


View ruddhess's profile

Japanese Tool Box #4: Glue-Up Bottom

04-09-2015 04:23 AM by ruddhess | 0 comments »

I actually resorted to using my new HF power planer to get the edges of these two boards flat and smooth enough to glue up. But I am most interested in making and constructing right now. I actually love all those dark knots against the lighter colored white pine boards! I did find a relatively good crosscut saw at local GW this evening. Only 8$ (within my price range!) A juxtaposition of saws: I got this saw today while on lunch. I used it tonight to trim the edges of the bottom...

Read this entry »


1 2 next »
19 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com