LumberJocks

Woodworking blog entries tagged with 'white pine'

  • Advertise with us
View CartersWhittling's profile

Tool Chest #1: Design and Materials

01-17-2012 08:06 PM by CartersWhittling | 10 comments »

Hello. I have decided to start work on my new chest tool. I am not sure when I will get around to starting the build, but I have got the design and materials ready for when it comes time to begin. I bought the book by Chris Schwarz “The Anarchist’s Tool Chest” back in the early parts of summer http://www.leevalley.com/en/wood/page.aspx?p=67610&cat=1,46096,46109. I have always enjoyed reading his blog and when my friend told me about the premise of the book I though...

Read this entry »


View CartersWhittling's profile

Tool Chest #2: Starting the Shell

05-02-2012 02:44 AM by CartersWhittling | 13 comments »

Hello. I happened to have little work today, so I had time to do some work on the tool chest. A few weeks ago I had skip planed all the parts for the shell, and some of the oak. Skip planing is simply using a heavy set plane to remove the twist and warpage in a board. Thats all. You do not use a try plane or smoother at this point. By skip planing the lumber before hand, the lumber has a second chance to warp if it has to, since there was fresh wood removed from both faces. Now a...

Read this entry »


View DustyMark's profile

Building a KARA Hummer Layout Duck Boat #1: Building the Lower Frame

05-11-2015 07:00 PM by DustyMark | 6 comments »

The Requirement I moved back to MN in June 2014, after nearly 30 years away, and my brother quickly introduced me to duck hunting. We’re not on any of the major flyways here, so we need to put everything in our favor possible. We read about the advantages of layout boats in providing maximum concealment from wary ducks and talked about it in the duck blind all last season. Our hunting party consists of my brother, my nephew, and me and we decided to build three one-man layout boat...

Read this entry »


View Mike Chapman's profile

White Pine Log Cabin

08-23-2010 11:44 PM by Mike Chapman | 23 comments »

On July 10, 2010 I began to build my log hunting cabin. It starts with harvesting blown down white pine. We had a horrendous wind storm two years ago that left millions of board feet of timber in ruins. We put some it to good use. Go to my website and navigate to “Work-In-Progress”. There you will see the White Pine hunter’s cabin being created from logs, to lumber, to rough cabin, and finally, to finished cabin. I’m building the log cabin right outside of my woo...

Read this entry »


View robbinscabin's profile

How to finish a log bed? No, Really...How do I finish it?

05-02-2011 06:22 PM by robbinscabin | 31 comments »

Since we’ve started a business, North Country Rustics (find me on Facebook) we’ve been very busy but we’ve also tried to take our projects to a new level. We’ve made several log beds (eventually, we even began making the bed frames from log~even though I wimped out on my son’s bed) but we are currently working on our first log bed for sale. The queen sized bed is really our best work yet but we’re stumped when it comes to how we should finish it. We re...

Read this entry »


View naomi weiss's profile

My Roubo Build #1: Getting the Lumber

03-18-2010 10:42 AM by naomi weiss | 9 comments »

So it’s finally happened! Of course, the day before i read that the Schwarz is coming out with another workbench book, this one more hand-tool-apartment-dweller-friendly, but no matter :-/.The lumber has been ordered and picked up. I know it’s premature to thank ppl for helping me build a workbench when all i have is a pile of lumber, so for now, i suppose i would like to mention that there are two people without whom i could not have a pile of lumber that is hopefully soon to be ...

Read this entry »


View ruddhess's profile

Japanese Carpentry Tool Box 第 #1: Number 2 - second toolbox.

04-19-2015 09:09 PM by ruddhess | 0 comments »

I enjoyed making the first one so much, here goes number 2. I decided to leave the drywall screws in the batten boards on the top of the first box. I like the way they look, and I like the way they grip/hold stuff down. I’ve been using drywall screws to put stuff together for since forever. I think they look fine. Kind of utilitarian. That fits my style well. So I am going to use 1-1/4” DW screws for the flat joins and 2-1/2” DW screws for the perpendicular joins (bugle head...

Read this entry »


View ruddhess's profile

Japanese Carpentry Tool Box 第 #2: Cutting Mortises & Fitting Up

04-22-2015 02:19 AM by ruddhess | 0 comments »

Marking out the mortises – shallow chisel cuts on outside edges and nail punch the center so forstner bit will center correctly. 3/4” Forstner bit works well. Chopping the corners out with a 3/4” chisel. Works well. Close-up of one mortise at the beginning cuts. Initial fit for the first set of mortises. Pictures of the mortise/tenon fit. Much better (less gaps) than the first box I made recently. Inside corner. Outside corner. One...

Read this entry »


View ruddhess's profile

Japanese Carpentry Tool Box 第 #3: Glue Up - Sides

04-22-2015 04:29 AM by ruddhess | 2 comments »

Finished cutting the mortises and everything fit pretty well. Just had to run the rasp over a couple of the joints to level everything first. Then got the sides all glued up. Diagonal measurements are the same – square overall. This one is coming out better than the first one (so far). Just more pictures of each of the square mortise/tenons.

Read this entry »


View ruddhess's profile

Japanese Tool Box #7: Filling In Some Cracks - Oops!

04-17-2015 02:17 AM by ruddhess | 5 comments »

First off, I should have used epoxy. Secondly, my experiment with coloring yellow glue went awry. Well, somewhat anyway. I found a way to make a nice dark brown color (could be used successfully on some dark walnut). I just got into the cupboard and found some cheap food coloring like they sell to color easter eggs. I added a bunch of red first, and that came out sort of magenta looking, so I added a little bit of each of the other colors: yellow, green, blue. Mixed it with regular Elmer̵...

Read this entry »


1 2 next »
19 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com