LumberJocks

Woodworking blog entries tagged with 'waterproofing'

  • Advertise with us
View DustyMark's profile

Building a KARA Hummer Layout Duck Boat #7: Sealing the Hull Interior

05-20-2015 01:28 AM by DustyMark | 4 comments »

Objective This boat is going to get wet and stay wet for days at a time. I plan to seal the interior with epoxy to give it at least some protection from the elements. My main concern was with the plywood. That is sealed well with the fiberglass cloth. The keel, gunnels, and ribs will be sealed by caulking the seams where they meet the plywood with thickened epoxy and coating the rest with unthickened epoxy. Caulking I imagine a builder could use silicone caulk to seal the joints,...

Read this entry »


View AnnaEA's profile

Random shop notes #8: Wire brushes and brooms.

08-17-2010 09:23 PM by AnnaEA | 2 comments »

I spent a loud morning dragging my washer and dryer across the basement. Once they were out of the way I settled in for a grimy and dull bout of wall scraping and brushing. I also gave eviction papers to some 347 spiders of various sizes, most of whom went peacefully and without protest. I am so pleased with the ‘peacefully and without protest’ aspect of my spider eviction operation that I am adamantly refusing to think of where they might have relocated too. I have al...

Read this entry »


View AnnaEA's profile

Random shop notes #4: Good luck.

08-05-2010 11:58 PM by AnnaEA | 1 comment »

I found a nice little coping saw at the Habitat today. Put a new blade into it, and tried it out on a bit of plywood. Failed utterly. I don’t know what I’ am doing with this tool. I’ll read up on it. Ran into the head of the maintenance staff while I was walking my dog this morning. I asked what the current waterproofing is, so that I would know how to deal with it when I re-do the wall. He told me that they use dryloc, and that if I want it re-waterproofed I ca...

Read this entry »


View AnnaEA's profile

Random shop notes #2: Other people working.

08-04-2010 11:22 PM by AnnaEA | 0 comments »

Today’s been a day of other people working—I had a guy from the community maintenance staff looking at my down spouts, and there will be an electrician coming in a couple of hours to give me an estimate of what it’ll cost to run a couple of dedicated circuits for my shop and tell me if I need a sub panel or not. That’s right – my 84 square foot patch of the basement is going to get all gussied up with some dedicated circuits! One for lighting and charging un...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com