LumberJocks

Woodworking blog entries tagged with 'watchbox'

  • Advertise with us
View Andy's profile

Watch Box #8: Finished

02-03-2012 04:43 PM by Andy | 42 comments »

Finally I got it done and shipped it off to the customer. He wont get it in his hands until next week, so I will post his impressions when I hear back. I hope its what he wants!!! TIP:Some of you may know about this but many will not. This is my secret to quickly fine sand the box prior to spraying lacquer. I hand sanded down to 220 and then I finish up with green nylon pads. These were bought at the local dollar store. Guess how much? Thats right, a whole dollar. You can buy similar pads ...

Read this entry »


View Andy's profile

Watch Box #4: Glueing in the medallion

12-28-2011 02:42 AM by Andy | 13 comments »

This shows the medallion getting glued in place. I decided to do a loose fit between the medallion and lid on this one due to the fact that I just couldn keep the bloodwood from chipping out even with a new cutter and climb cutting. I have done this before, filling the gap with black epoxy for a shadow line effect. I am using spacers to even out the gap. Before fitting the medallion I had ran a router around the inside of the box and cut a 3/8” x 3/8” rabbit for the lid to ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com