LumberJocks

Woodworking blog entries tagged with 'wagon'

  • Advertise with us
View PurpLev's profile

Bowling Alley Workbench #15: Falling Off the Wagon... (vise that is)

09-09-2010 04:06 AM by PurpLev | 28 comments »

Hard to believe, I know. It’s been over a year since I announced the workbench complete, although there was always that missing part, that loose end that had to be tied off in order to officially declare it a complete project. Not only was it a loose end (literally, the vise screw was hanging loose in it’s slot), but it was a missing integral part of the bench that I kept on wishing I had setup and functional. The Wagon Vise to hold down boards for planing flat and similar work...

Read this entry »


View PurpLev's profile

Bowling Alley Workbench #1: Conceptual Design 1 - feedback appreciated

05-27-2009 11:37 PM by PurpLev | 21 comments »

So after we've got the bowling alleys. now it’s time to put them to to use (not really ‘now now’ but … you know what I mean). So, I really would like to make this one a keeper, and not have to redo this bench unless I really fancy it in the future with lots of extra time on my hands and nothing better to do with it (hence – not likely it’ll happen), and in order to do that, I figured I’ll make this one as close as I can to the ‘ultimate’...

Read this entry »


View Mark A. DeCou's profile

Hmmm? Requesting Inspiration for Antique Wagon Wheels.

10-10-2007 01:30 AM by Mark A. DeCou | 17 comments »

This week I came up with this axle and wheels from an old antique wagon. I have another set of wheels I found previously, but they don’t match this new set. I am just scratching my head about what to do with them. I know they are good for something, and something really cool, I just don’t know what yet. Last Spring, I was trying to figure out how to do a backdrop set for a Cowboy VBS program, and the jocks sure came to my aide. So, I thought, “why not ask the lumb...

Read this entry »


View PurpLev's profile

Bowling Alley Workbench #2: Design B...B...Because I said so. -more criticism please

06-04-2009 10:17 PM by PurpLev | 18 comments »

So after giving some food for though, and going back and forth between 2 designs – my original one: and the Roubo Bench (the one I was drooling over was Jameel’s bench from handcrafted vises), I decided to take the things that would work best for me today, based on materials that I have available today – while keeping an open door for future changes. here are the features I am going for: 1. wagon vise – tail vise abilities, without the sagging, and without...

Read this entry »


View PurpLev's profile

Bowling Alley Workbench #16: The Wheel on the Wagon goes round and round

09-18-2011 05:17 AM by PurpLev | 18 comments »

I wanted to do this for a long time and had the parts ordered and delivered a while ago, but one thing led to another and this was kept on the back burner and never saw the light of day. Ironically, it is now finished but still with no light of day as it is almost 11pm… All it gets is the light of the moon (which some may say is better). I really liked benchcrafted wagon vise (even a free plug for them) But for what it is I think it’s a bit overpriced (for a vise). Don’t ...

Read this entry »


View yuridichesky's profile

Workbench #1: Wagon vise from scratch

01-27-2013 01:19 PM by yuridichesky | 15 comments »

The bench I’m building is a small one due to very limited shop area (about 10 by 4 feet), so the top is 40” by 10” (laminated pine) plus tool tray (about 6” wide). As for vises after some considerations I decided to go for leg vise and the wagon vise. It took me a while, but now top and wagon vise are ready. Here is my wagon vise kit ready for assembly: The hardware is a 3/4” (19mm) machine screw with square brass nut ($10 flea-market find). The scre...

Read this entry »


View Buckskin's profile

Fall Sketchup Challenge - Wagon Wheel Table

09-13-2007 07:41 PM by Buckskin | 9 comments »

Being from Wyoming I have a passion for all things Western, Rugged, and Rustic. Don’t tell anyone this, but I am beginning to like Sketchup. I posted in an early thread how I would rather just use pencil and paper to do my design work. After what Mot has named the “Freedom Table” I decided to try again. I actually like this approach to design. It can be easily flipped and rotated to give different vantage points. Something my pencil and paper skills lack. So bac...

Read this entry »


View Tomato's profile

15 Ft Power-Drifter Fishing Boat, "Tiger Lily" #3: Took a break to build a work bench... check her out (Gallery)!

04-01-2016 03:32 PM by Tomato | 1 comment »

Found this at a thrift shop and restored it. (Just an old Stanley Two-tone Jack but works for now) My own knife, plane iron, and chisel sharpening system I designed. 80 to 7000 grit.

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com