LumberJocks

Woodworking blog entries tagged with 'video'

  • Advertise with us
View David's profile

My Shop Tour

05-21-2007 12:49 AM by David | 32 comments »

This is a tour of my garage shop in Portland, Oregon. Yes, I do have to park a car (actually 2 vehicles) in my garage. I don’t mind because it is my space and at least I get to pursue my hobby. I know there are a lot of guys like me that have a multi-purpose garage as thier shop, so this is for all the small garage shop guys! Thanks to Martin, Marc & Niel for this awesome video challenge. It has been very cool to put a face and voice to all of the LumberJocks that have posted a vide...

Read this entry »


View mot's profile

Auxillary Workbench #2: Using the Festool Domino to bore all mortises to assemble the tressel bases...VIDEO

05-20-2007 08:56 AM by mot | 8 comments »

Yeehaw! I anticipated this step all day. I had originally planned to use Dowelmax to join these pieces because I was more comfy with the jig and this has to align perfect. I then though, phooey! I’ll use Domino and give it a good test drive. The first picture shows the Festool Domino fitted with the Trim stop. This fitting allows you to “center or off-set the Domino joiner on narrow work pieces for perfect positioning.” HA! If anyone can screw this up, I can! I d...

Read this entry »


View TheAggie's profile

TheAggie's Shop Blog

05-18-2007 06:16 AM by TheAggie | 15 comments »

Here is TheAggie’s shop video for the Challenge 02 contest. I just hit the highlights of my shop, not all the little nuts and bolts laying around.

Read this entry »


View mot's profile

Tools #1: Festool Domino and Dowelmax Comparison on Simple Joints - VIDEO

05-17-2007 08:12 PM by mot | 37 comments »

Hi Folks, There is alot of Domino support and bashing, as well as Dowelmax support and bashing on various woodworking forums. Typically the owners of the tools talk about them like they are just about the second coming. The detractors talk about their excessive (relative) price. The Domino “won’t pay for itself.” The Dowelmax is no better at 250 bucks than a beadlock is at 50 bucks. Usually stuff like that. If you read close enough or care, many of the supporters an...

Read this entry »


View David's profile

Quarter Size Cherry Quilt Chests #3: Leigh FMT Jig - Part 2

05-16-2007 09:38 AM by David | 8 comments »

Well, this is the second of the LEIGH FMT Jig videos. Again please excuse the ameteur quality. This is just my way of sharing a fun day in the shop while pushing my digital envelope, so to say. Things have been a bit hectic here so it was good to get some dedicated time in the shop. Many thanks to my wife for allowing this indulgance! I thought a video post would be fun to explore since I have learned so much from my fellow woodworkers via digital imagery. I am not sure what I am going to ...

Read this entry »


View David's profile

Quarter Size Cherry Quilt Chests #2: Leigh FMT Jig - Part 1

05-16-2007 08:37 AM by David | 11 comments »

Had a great day today working in the shop. I have gotten behind on my schedule for the cherry quilt chests because of some family isuues and increased work load. Today was a warm and sunny day in Portland and it was a pleasure to get out in the shop and make some cherry sawdust! I thought it would be fun to make a small video to share the experience. The original video was too long so I made a two part episode. I figured you guys would be the only ones that could actually sit and watch a rout...

Read this entry »


View mot's profile

Festool MFT 1080 as Tablesaw Outfeed

05-16-2007 04:24 AM by mot | 11 comments »

Hi Folks, I did a little podcast on how I use the Festool MFT1080 as my tablesaw outfeed. After watching the video, I think I have more questions than I answered, but if you want to see something specific, drop me a line. I hope to do some more podcasts on some of my setup and how I do things. I’m not a professional woodworker, so don’t expect David Marks. However, it might just be the way you do things in your basement shop. Cheers! ...here’s the link to m...

Read this entry »


View scottb's profile

LJTV #1: Shop Tour

05-14-2007 06:07 AM by scottb | 22 comments »

Our buddy Darryl says he has the Woodworking Dungeon – perhaps now he’ll agree that I really do… with spiders and miles of cobwebs barely overhead for a nice festive touch. One upshot to this contest was forcing myself to clean up the space a bit (Ignore all the dust and spiderwebs. I do). I also found 3 six-in-one screwdrivers that were slated to have their handles replaced with new new wooden ones… That puts versions 4-6 on the to do list, without spening any $$...

Read this entry »


View gizmodyne's profile

Shop Tour Challenge Entry

05-12-2007 03:11 PM by gizmodyne | 29 comments »

Hi all, It has been a busy week, but I managed to knock something together for the challenge.Hope you enjoy.

Read this entry »


View thewoodwhisperer's profile

Video Posting Tutorial

05-07-2007 12:48 AM by thewoodwhisperer | 11 comments »

Read this entry »


« prev 1 ... 602 603 604 605 606 607 next »
6063 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com