 Japanese Tool Box #5: HandlesNew saw cuts SO very smooth – glue-up quality! I’m very pleased! Gluing the second “handle” to the end. Handles are clamped and waiting for glue to dry. Bottom still has screws in place and will come out tomorrow some time when the glue has dried more. Starting to look really nice! I love this design – traditional Japanese carpenter tool box. Uh oh! I am such a nongerhead! The handle on one end was sticking up just a tad so I went to shave it down a b...  Rocket Bookcase #2: First CutsThis design for this bookcase calls for a simple shape for the backing. In the previous post I mentioned splitting it in two for ease of construction. Here’s how I did it: Using the Versacut, I freehand cut every line in about ten minutes. Using the built in laser guide made it easy. In the end, I had some nice sharp, accurate angles and two rocket stages cut out. I couldn’t resist stacking them, so here’s the final height, 70”: It took far longer... Castle Bookcase #8: First TowerI spent the time I had today out in the muggy shop sweatin’ and sandin’. I took the little palm sander to all the front edges of the plywood shelves and rounded everything over. Lesson learned: next time sand everything BEFORE you assemble…. I had decided over the weekend to forfoe adding trim to the front of each shelf because this thing will be primed and painted anyway…you won’t be able to tell what type of wood was used to begin with. Once all the crack...  Refrigerators, CAD, and Circumcision #2: Cutting the cabinet and installionCabinet Circumcision, Virtual and in Reality The entire cabinet is veneer covered particle board and is heavy. There were four screws in the bottom, four screws in the top, three screws in the back, and six staples holding each of the dividers (perhaps a little overkill?). The hardware was not added to the model to keep the model count below 60 as that is a limit for the free version of Creo. The cabinet top and bottom were doweled to the sides with eight dowels in each edge. Figure 8...  
Top SeriesTop Bloggers |
|
|
| Author | Latest activity | New comments or replies since you last checked |
||||
|---|---|---|---|---|---|---|
|
Off-topic content. Click to see the post. |
Carey Mitchell | 03-05-2021 11:01 PM | sign in to get readership tracking | ||
|
Plywood Storage Boxes |
18wheelznwood | 03-05-2021 10:57 PM | sign in to get readership tracking | ||
|
|
Plastronaught |
wildwoodbybrianjohns | 03-05-2021 10:56 PM | sign in to get readership tracking | ||
|
|
Off-topic content. Click to see the post. |
woodbutcherbynight | 03-05-2021 10:53 PM | sign in to get readership tracking | ||
|
|
2021 Shop tour....and Dioramas? |
Bill Huffman | 03-05-2021 10:45 PM | sign in to get readership tracking | ||
|
|
Advice needed for stair conversion |
DannyW | 03-05-2021 10:44 PM | sign in to get readership tracking | ||
|
|
Stumpy Nubs Woodworking Journal- For woodworkers of all levels (part 6) |
StumpyNubs | 03-05-2021 10:43 PM | sign in to get readership tracking | ||
|
|
Inlayed serving tray |
987Ron | 03-05-2021 10:43 PM | sign in to get readership tracking | ||
|
|
Off-topic content. Click to see the post. |
Rick Dennington | 03-05-2021 10:37 PM | sign in to get readership tracking | ||
|
|
Off-topic content. Click to see the post. |
chrisstef | 03-05-2021 10:33 PM | sign in to get readership tracking | ||
©2021 Verticalscope Inc. All Rights Reserved. | Terms of Service | Copyright | Privacy Policy |
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
