LumberJocks

Woodworking blog entries tagged with 'turning saw'

  • Advertise with us
View HokieKen's profile (online now)

Bow Saw Build #4: Baby Steps...

02-20-2019 02:40 PM by HokieKen | 10 comments »

I have so many small projects going on in the shop right now that it’s hard to find time to finish this saw since it’s not real high on the priority list. But, I had about 30 minutes to kill last night and it seemed to be calling my name. So, it may take me several short sessions but I will finish this puppy! ;-) For last night, I just finished fitting the new cross-member. I had one side done last time so it was on to the second side. I marked a square line across the piec...

Read this entry »


View Daniel Solowiej's profile

Make a Shaving Horse | Hand tools | Part 4 | The End

12-23-2017 12:15 PM by Daniel Solowiej | 2 comments »

How to make a shaving horse, as my way …Here the last part of this project, “THE HARVEST”. Merry Christmas for all of you ! Hope you like it, I wish you the best, and until the next! https://youtu.be/3jD8giy75lY I really hope you like this video, and if so, you share it with others on your social networks, like and comment. All it’s free, quick, and much appreciated by me, because that give me willingness to continue doing. Also if you aren’t subscribed, please d...

Read this entry »


View Daniel Solowiej's profile

Make a Shaving Horse | Hand tools | Part 3

12-16-2017 11:07 PM by Daniel Solowiej | 6 comments »

How to make a shaving horse, as my way … Enjoy with me this peaceful process and take the time to have fun in all steps. Here the third, and last but one part of this project, soon you will see the end. I wish you the best, and until the next! https://youtu.be/vocIAxwyXtU I really hope you like this video, and if so, you share it with others on your social networks, like and comment. All it’s free, quick, and much appreciated by me, because that give me willingness to continue ...

Read this entry »


View HokieKen's profile (online now)

Bow Saw Build #2: Cuttin' and Fittin'

08-25-2017 12:42 PM by HokieKen | 6 comments »

I did most of this before I started taking pictures so the pics are a little sparse. But, I think the process is fairly easy to follow. First thing I did was to make my two 5/8×1/4 mortises in the vertical frame pieces. I hogged the bulk out on the drill press then cleaned them up with a chisel. The mortises are 3/8” deep… (this will be important later!) On a side note, I’ve been using the hell out of my Gramercy holdfasts on my new bench. I don’t know h...

Read this entry »


View HokieKen's profile (online now)

Bow Saw Build #1: Getting Started

08-24-2017 11:57 AM by HokieKen | 13 comments »

Well, my buddy Bill (builtinbkyn) recently made a couple of turning saws and I knew I had to have one. So when my Mom asked me what I wanted for my birthday earlier this month, I told her I’d like one of the Gramercy bow saw kits from Tools for Working Wood. For $29 you get 3 blades and the brass pins needed. You can buy various other parts as well but, where’s the fun in that? ;-) So, I started with that and off I go… First I chose my woods and milled my blanks...

Read this entry »


View TheGravedigger's profile

New Post on the Little Good Pieces Blog: Turning Saw - Putting It All Together

12-14-2010 07:30 PM by TheGravedigger | 0 comments »

 There’s a new post on the Little Good Pieces Blog:  “Turning Saw – Putting It All Together”.  All the pieces finally come together to make a completed saw.  Check it out! http://littlegoodpieces.wordpress.com/2010/12/14/turning-saw-putting-it-all-together/

Read this entry »


View TheGravedigger's profile

New Post on the Little Good Pieces Blog - Turning Saw - Shaping the Parts”

12-09-2010 06:11 PM by TheGravedigger | 0 comments »

There’s a new post available on the Little Good Pieces blog: “Turning Saw – Shaping the Parts”. I turn the pieces of the turning saw from rough blanks to finished components. Check it out! http://littlegoodpieces.wordpress.com/2010/12/09/turning-saw-shaping-the-parts-2/

Read this entry »


View TheGravedigger's profile

New Post on the Little Good Pieces Blog - “Turning Saw - Roughing Out the Frame"

12-03-2010 05:36 PM by TheGravedigger | 0 comments »

There’s a new post available on the Little Good Pieces blog: “Turning Saw – Roughing Out the Frame”. This is part one of three on constructing a Gramercy-style turning saw. Check it out! http://littlegoodpieces.wordpress.com/2010/12/03/turning-saw-roughing-out-the-frame/

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com