LumberJocks

Woodworking blog entries tagged with 'tip'

  • Advertise with us
View Thuan's profile

One Day I'm Gonna.... #1: USE MORE CORK

12-14-2007 07:49 PM by Thuan | 7 comments »

Audrey is from Oklahoma, slender, gray haired and bearded, looks to be in his 80’s. He is in fact barely 60 but his life experience added years to his look. We were having lunch, his usual hard candies and cigarettes and me, a burger with a helping of second hand smoke.I told him I had this great idea about gluing cork boards on the floor of my kitchen. I got the idea because the insert of my handcrafted shoes were made of cork, and it’s great on my feet all day. It’s supportive yet cushiony....

Read this entry »


View itsme_timd's profile

Homemade "Tools"

12-13-2007 10:07 PM by itsme_timd | 6 comments »

Thought I’d share a couple pics of some of my, umm… ‘creations’. I’m sure everyone has fabricated a makeshift tool before, and shopmade jigs are commonplace. Here are a couple ‘tools’ that I put together because I didn’t have the actual tool. Both of them worked great for their intended purpose. My Table Sander I simply took a full sheet of sandpaper, folded the end over the edge of my work surface and clamped it down then stuck a pie...

Read this entry »


View gene's profile

Woodworking Information links

12-07-2007 03:49 AM by gene | 3 comments »

Has anyone checked this site out. Great information site. Check the link for free software for woodworkers. I have a few on my computer now. I think this guy is either a LJ’s member or he should be.http://users.goldengate.net/~kbrady/woodlinks.htmlGod bless

Read this entry »


View Don Kondra 's profile

My Secret Magic Mix :)

12-05-2007 03:12 AM by Don Kondra | 32 comments »

If you dread the finishing part of a project as I used to, perhaps I can persuade you to give this mix/technique a try. The idea of using an oil combined with a film forming finish is not new; this is simply the one I have settled on after experimenting with a number of different products. An ideal finish should be easy to apply, enhance the grain and figure of the wood and provide a reasonable level of protection from normal wear and tear. The soft hand rubbed glow is a bonus. If yo...

Read this entry »


View Blake's profile

Vega Fence Modification

12-04-2007 02:13 AM by Blake | 21 comments »

I don’t know if anybody has a Vega table saw fence out there… I got mine used and really like it. It is not one of the big names for after-market fences but it is a good, accurate T-square style fence. It’s only design problem is that to tighten it you push the front knob down, (like most fences) but on the Vega this motion would tend to lift the rear end of the fence off of the table. Vega’s solution to this was to attach a clip on the back of the fence which reach...

Read this entry »


View Blake's profile

Rare Earth Magnets Around The Shop

12-04-2007 01:43 AM by Blake | 6 comments »

I find handy uses for rare earth magnets all over my shop. I just thought I would share this as a tip. Here are some of the places I use them: My table saw fence has a magnet embedded in the plywood top I made and it keeps a ruler handy: These magnets keeps blades and an alen wrench handy on my scroll saw base: A wrench for my jointer and a push block are magneted to the jointer base: Another ruler magnited to the top of my radial arm saw: The three sizes of...

Read this entry »


View Blake's profile

Parts For Tools

12-03-2007 09:13 PM by Blake | 2 comments »

I just wanted to let everyone know, in case they don’t already. At our Used Tool Store we sometimes need to make repairs on tools in order to resell them. When we need parts we go to Tool Parts Direct (toolpartsdirect.com) This is the best way that we have found to get parts for tools. If you go to the website and type in the brand and model number you will get a blown-apart schematic of almost any tool ever made. (Click on the schematic for a full sized view). There is also a parts...

Read this entry »


View itsme_timd's profile

Tip for putting sawdust to good use. (make firestarters!)

12-03-2007 04:56 PM by itsme_timd | 7 comments »

Hi All, Here’s a tip to use the sawdust that you accumulate. It has to be mostly ‘pure’ sawdust for this project. My wife makes candles and after pouring batches she has some leftover wax – usually colored and scented. We toss all that together and when it gets to be a decent amount we can make our own firestarters. It’s prettty simple and there are naturally variations. But essentially you melt the wax and add sawdust until you get a sludge consist...

Read this entry »


View Liam's profile

Laymans description of the most common tools

12-03-2007 03:22 AM by Liam | 10 comments »

*copied from the web Explanation of Common Tools: DRILL PRESS: A tall upright machine useful for suddenly snatching flatmetal bar stock out of your hands so that it smacks you in the chest andflings your beer across the room, splattering it against thatfreshly-stained heirloom piece you were drying. WIRE WHEEL: Cleans paint off bolts and then throws them somewhere underthe workbench with the speed of light. Also removes fingerprints andhard-earned guitar calluses from fingers in abou...

Read this entry »


View Blake's profile

Consider Buying Used Tools

11-28-2007 11:52 PM by Blake | 20 comments »

Buying used tools is an under-looked option for low-budget woodworkers. First of all, I should tell you that I work in a used tool store. So this issue is close to my heart because it is not only a hobby for me but also what brings home the bacon. Every day at work I inspect, research, appraise, test, buy, clean, fix, restore and then re-sell used tools. But before I was an employee of the Used Tool Store I was a customer. The Used Tools Store happens to be across the street from the...

Read this entry »


« prev 1 ... 252 253 254 255 256 next »
2552 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com