Woodworking blog entries tagged with 'threaded inserts'

  • Advertise with us
View harum's profile

Marking Gauge #3: some progress

08-01-2014 05:19 PM by harum | 0 comments »

Haven’t had much time lately for my marking gauge: our neighbor pulled out of her garage on her SUV without … opening the garage door. Fixing the door has taken more than I thought it would. Epoxied brass wear strip, the fence and put in the threaded insert. Instead of the suggested 3/8” hole for the insert I had to make it a bit wider than 7/16”—the rosewood’s really hard. Found a brass bolt to be sacrificed for two shoes. The knurled scr...

Read this entry »

View hjt's profile

Flip Table #2: Building the Base

01-18-2014 09:59 PM by hjt | 2 comments »

In the process of building the base, I did what I do best… I screwed up. This time the screw up was adding incorrectly. After a little discussion with my fellow LJ’s, I decided to cut more lumber and start over. I ran a bunch of lumber through the planner. While I have this connected to my dust collector, I’m amazed how much shavings still end up on the floor. I felt half laps would provide me the best strength and support for this project, especially since the planer and drill w...

Read this entry »

View nobuckle's profile

Learning the hard way!

11-05-2010 12:33 AM by nobuckle | 10 comments »

Today I started working on a router table idea that I came up with. I currently have a router table (more like a cabinet really) but it takes up to much room in my shop. If you’ve read my profile you know that I only have 99 sq. ft. of main shop space, so maximizing space is a constant challenge. I’ve decided to move the left-hand table saw extension of my table saw to the right side and replace it with some material that could be used for a router table. The material I select...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics