LumberJocks

Woodworking blog entries tagged with 'teak oil'

  • Advertise with us
View peterrum's profile

Inlay card table refurbish #5: Teak oil application

12-19-2015 02:48 PM by peterrum | 1 comment »

I have now applied two coats of teak oil to the table to seal it up a bit and hopefully this will help to reduce the amount of air bubbles that can show up during the epoxy application. I am still researching which bar top epoxy to use so it may be a while before my next post. I will probably have to get it mail ordered in after the Christmas season. At any rate, here is a photo. I like the way the teak oil has popped the different colours of the wood.

Read this entry »


View PASs's profile

Wands #2: The Elder Wand

03-19-2014 01:18 AM by PASs | 4 comments »

Since Bryan didn’t want a crooked elder wand I went back to the drawing board for a straight one.I went to the dowel bucked and found a piece of old draw-blind dowel.I chucked that in the lathe to make the straight wand. Since it was a straight turning project I use a spindle roughing gouge, spindle gouge, and skew to do the rough forming. Then I sanded to 320 grit, and applied a colonial stain. I decided to do the dremel dimpling after the first stain because I wanted to d...

Read this entry »


View PASs's profile

Wands #1: The NOT Elder Wand

03-19-2014 12:45 AM by PASs | 7 comments »

My Grandson Bryan came up to visit this week.He knew I made canes and asked me to make him one.After talking with him and his mother we decided he’d much rather have a wand.He’s very animated and energetic (read HYPER) so for the first 10 minutes he was full of ideas and tangents of creative thought (making lightning bolts shoot out the end type stuff.)He’s a big fan of the Harry Potter movies and decided he wanted The Elder Wand.I’ve never tried making a wand before, ...

Read this entry »


View Steve McCracken's profile

Redwood

04-24-2011 05:02 AM by Steve McCracken | 0 comments »

I have three 4×4’s that after much sanding and steel wool applications have been treated to a bath in teak oil. Color me suprised with the outcome. This outdoor project was worth the 2 year wait. I now will use my new plunge Craftsman router to make room for black tubing to add pizzazz to some climbing roses. I had no idea how the teak oil was going to “shine” my redwood. Wow. Color me impressed. Pictures will definitely follow.

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com