LumberJocks

Woodworking blog entries tagged with 't2'

  • Advertise with us
View GodofBiscuits's profile

Breathing life into a trusty saw

04-19-2014 11:51 PM by GodofBiscuits | 5 comments »

I bought my Craftsman table saw about 6 years ago now and it’s been a good saw as long as you took extra special care to ensure the horrid fence it came with was straight each and every time you moved it. The fence system that came in these saw is appalling to say the least and down right garbage when compared to a good biesemeyer style fence. Last week using the saw, I moved the fence and spent several minutes trying to get it straight so I didn’t ruin the beautiful piece of curl...

Read this entry »


View Tedstor's profile

Craftsman TS Upgrade #3: Fence and Zero Clearance Insert Installed

08-04-2012 11:46 PM by Tedstor | 6 comments »

Its been a somewhat busy week for me and I had to install the fence over a 4-5 day period. All said, I’d estimate the total install time at 4-5 hours. And the results were not 100% perfect. The front of the fence sat a nice, cozy 1/16 off the table, while the rear was about 1/8 (maybe even 3/16)( See 2nd pic below). I suppose I should happy it wasn’t worse seeing as how I drilled the rear portion of the table and the rail with a hand drill. I could have removed the rear rail, enla...

Read this entry »


View superstretch's profile

Delta T2 36-T30 Fence on a Grizzly G1022Z Table Saw

12-28-2011 07:33 AM by superstretch | 5 comments »

INTROFor Christmas, my bro and I gave my dad the above mentioned fence as a gift. I had read in a few places that people had successfully (albeit blasphemy) mounted this fence to a G1022Z. I had my reservations, but after looking at the equivalent Shop Fox and Vega models (waaay more expensive), we decided to pull the trigger and get one from a well-respected buyer on ebay. At the same time, ebay was running a ‘fast and free’ shipping promotion. I ordered the fence on a Tuesday an...

Read this entry »


View DannyBoy's profile

My Shop #2: Table Saw Fence

10-29-2009 10:02 PM by DannyBoy | 5 comments »

To continue the series of setting up my Craftsman table saw, I’d like to go over adding the aftermarket Delta T2 fence system. I have basically followed the same steps as Jamie did on his setup. For the most part, this is the way to go for this setup. A couple of things before I get started. First, you will have to drill new holes in the mounting brackets for the fence system. There is no way around this. If you take your time and pay attention, you’ll do alright. Second,...

Read this entry »


View JoshO's profile

Fence upgrades #1: Installing my new Delta T2-30 on a Craftsman flexdrive.

07-20-2009 02:34 PM by JoshO | 2 comments »

It all started with dissatisfaction with my Craftsman Flexdrive table saw. It was difficult to make a decent cut with the saw. I understood part of the problem could have been lack of experience on how to use the tool, but it wasn’t exactly a complicate piece of equipment and degree in rocket science wasn’t necessary. After doing some research, I came across an interesting post that taught me that a table saw is nothing more than table with blade mounted underneath it. All the mag...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com