LumberJocks

Woodworking blog entries tagged with 'super dust deputy'

  • Advertise with us
View TechRedneck's profile

Delta 50-760 with Cyclone Retrofit.

04-29-2012 11:46 PM by TechRedneck | 21 comments »

I have declared war on dust in the shop. My shop is in the basement/garage and I have been spending more and more time there. Recently I was planing/jointing around 100’ of rough cut cherry for a project which produced a lot of sawdust from all the power tools used. As a hybrid woodworker, I like to get my wood from the mill and prep it myself, saving money. Once I get the stock flat and square and within 1/8” or less then I switch to hand tools. I purchased a Delta 50-76...

Read this entry »


View dakotawood's profile

Setting Up Delta DC w/ Wynn Filter & Super Dust Deputy

03-31-2014 02:40 AM by dakotawood | 5 comments »

Alright, my first blog entry ever. I’ve learned so much from so many here. Figured it’s my turn to hopefully help someone out there. I researched this topic extensively. There were similar things on LJ about this upgrade. But I found I wanted some more specifics as to how to hook up exactly before I purchased everything. I have a Delta 50-760 DC. As you can kind of see in this image, my existing factory cloth bag has seen better days. It’s quite brown colored on the outsi...

Read this entry »


View JL7's profile

The Basement #28: Dust Collector Mod

05-20-2012 03:25 AM by JL7 | 11 comments »

Modded the single stage collector into a dual stage collector using to the super dust deputy from Oneida – Decided to to relocate the motor and blower above the cyclone and minimize the runs…..also hard mounted the cyclone under the blower and built a riser to bring the barrel into the cyclone. The barrel was a freebie from work. Worked on this all day and not much scientific data to report – but here is a video of the first run, using a bucket of super fine dust ...

Read this entry »


View Garth's profile

Yet Another Souped Up Harbor Fright Dust Collector with Cyclone

01-22-2014 02:28 AM by Garth | 4 comments »

So I know that lots of people have posted their dust collection systems, so I thought I would post mine. Below is the final picture and a schematic of what I built. In short, it’s a Harbor Freight dust collector, a Wynn Engineering Filter, a salad bowl as an internal baffle, and a Super Dust Deputy cyclone. The dust connections are made with 4” rubber pipe connections to the tools. To top it off, I just made my own remote control switch using some relays and a $10 wireless remote fo...

Read this entry »


View recordking's profile

tablesaw dust collection

02-13-2019 08:03 PM by recordking | 5 comments »

I recently upgraded my dc system to include a super dust deputy added to my 1.5 hp jet single stage dc, replaced my old piping w/new sch20 pvc. So far I’m very happy with the separation, compared to the old system its amazing. while doing this project I realized I needed to do something with the collection at my Jet pro shop table saw, the collection that comes standard on the saw is awful at best. I removed the existing bottom plate and replaced it with a new one dropped be...

Read this entry »


View bkseitz's profile

Air Quality #2: Harbor Freight DC with Super Dust Deputy modifications: Parts List

01-10-2016 06:02 PM by bkseitz | 0 comments »

Less the wood and attachment hardware for making a cabinet to enclose dust collector here is the parts list for my build so far. Milliard 6-Inch Duct Flange (qty 2) .... Connection points between SDD and Dust Can ONEIDA AIR SYSTEMS Super Dust Deputy Molded Cyclone Only … Cyclone Woodstock W1036 6-Inch by 10-Foot Wire Hose … Connection between SDD and Trash Can BRUTE 44 Gal. Dark Green Round Trash Can ... Chip and Large dust reservoir 6” 90 Degree Elbow .....

Read this entry »


View Fiddy's profile

Shop Dust Collection

02-05-2017 10:26 PM by Fiddy | 2 comments »

Thought I’d share my dust collection set up since I struggled to find something that gave me what I was looking for. Part of what I’ve been working on lately has been my “must have” shop projects and the first was dust collection. I had an older Jet 650 that I bought of CL for about $125 a few years back. When I was at my old house, I would just wheel it to which ever tool I was using and absolutely hated that. Most often I just wouldn’t use it. I had a few ob...

Read this entry »


View Todd A. Clippinger's profile

The Super Dust Deputy

09-15-2013 10:37 PM by Todd A. Clippinger | 19 comments »

I recently converted my single stage dust collector into a 2-stage system using the Super Dust Deputy by Oneida. In this video I share my initial impressions and performance of the system. Click Here For Video I do not cover all the modifications but you will see the overall setup and I give a basic price breakdown of the cost. I will cover the specifics of my conversion in the future. If you have been thinking of getting a Super Dust Deputy to convert your single stage DC into a 2-s...

Read this entry »


View gmaffPappy's profile

Finally, it's time to build the Frank'n-Collector #2: Duct

04-13-2019 12:20 AM by gmaffPappy | 2 comments »

I got the adapters for the 5” duct today, so it went up. It’s not all sealed up yet, but it’s together enough to do my initial tests. I plan on 2-3 more drops, but for now, I need at least one to continue building out the shop. There’s a lot of leaks (to be expected), but it was able to suck up everything I threw at it. For the first time since I purchased my Saw Stop, the inside is Dust Free! Then it’ll be time to make some of these mobile 5”...

Read this entry »


View BrettLuna's profile

My Dust Collector Mod #4: A little paint, a few screws...

09-13-2018 06:28 PM by BrettLuna | 0 comments »

Progress has been slow thanks to various distractions but I now have the caster base painted with Krylon “Hammered” spray paint, in black to give it a textured, industrial look. I also got the initial assembly of the chassis done: Assembly was good ol’ glue and pocket screws. Once the paint on the base has cured completely, I’ll set the chassis and dust separator in place to dial in where to mount the cone support. A complication with that is that cones are rou...

Read this entry »


1 2 next »
12 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com