LumberJocks

Woodworking blog entries tagged with 'stickley'

  • Advertise with us
View pintodeluxe's profile

Stickley / Jeff Jewitt Arts and Crafts Finish

04-15-2013 01:24 AM by pintodeluxe | 14 comments »

I wanted to recreate this Jeff Jewitt finish from Fine Woodworking #157, however the article didn’t list which formula was used. I consulted with Jeff, and it was Transtint Brown Mohogany dye, followed by McCloskeys Walnut stain. McClosky no longer makes stain, but sold to Valspar / Cabot. ---So I set out to make a sample board to achieve the rich, dark color I was after. ---The top colors are stain only, the middle colors are dye first then stain, and the bottom color is dye only. ...

Read this entry »


View pintodeluxe's profile

Stickley #369 Morris Chair #6: Leather Upholstery

03-24-2014 11:12 PM by pintodeluxe | 33 comments »

I took a leather sewing class to learn how to make the Morris chair cushions. -----The seat cushion and the ottoman cushion require web frames. Here I am milling the half-lap components for the web frames. -----Web frame assemblies are glued together. The seat frame should be sized 1/4” smaller in all directions than the opening in your chair, to allow room for the leather and two layers of batting.-----Corner blocks are added to the large seat cushion for additional strength. -----I...

Read this entry »


View CaptainSkully's profile

Limbert Lamp Table - Stickley #240 #4: Template Routing

08-12-2009 04:50 AM by CaptainSkully | 9 comments »

I was able to get back out into the shop and make some progress on this project. This was my first foray into template routing. I can definitely see the power of this technique. I was able to knock out the inside, decorative cuts on all four sides and they’re identical. They need almost no sanding. The slight errors in the template were the only problems on the finished sides. It took only a light hand sanding to fix those. I didn’t have too much trouble with wood grain, ...

Read this entry »


View pintodeluxe's profile

Arts and Crafts 6 Drawer Dresser #7: Clamshell Biscuits, And Building a Flat Top Panel

01-07-2013 06:39 PM by pintodeluxe | 3 comments »

Here is the plan from my design. It incorporates some Stickley design elements. --The dresser carcases are assembled, including the small divider that separates the top two drawers.--The small dividers are attached with biscuits. To cut the slots, I opened the top two web frames like a clamshell. The web frames were aligned, and clamped together. Then I added an Emerson straightedge clamp, positioned to center the small divider on the web frame. --The ruler on the Emerson clamp helps cen...

Read this entry »


View gizmodyne's profile

Stickley Dining Table no. 622 #2: Sketchup Animations, Plans, and Erasing the Past...

07-03-2008 06:22 AM by gizmodyne | 9 comments »

Plans I geared up today to finish the table that was started three years ago. I began by reviewing all of the original plans. Starting with the book “The Furniture of Gustav Stickley” by Joseph J. Bavaro & Thomas L. Mossman. This book is a great Stickley starter book for furniture making. I modified the original table by making it shorter in length. My old style drawings…..I also wanted to try a few new things in SketchUp that I had learned over at the Fine Woodw...

Read this entry »


View Mark A. DeCou's profile

Charles Rohlfs Oak Desk, Stickley Ellis Table & Iconic Crafts, Nelson Atkins Art Gallery Kansas City

04-30-2012 05:23 PM by Mark A. DeCou | 23 comments »

Wow! I made it, I finally made it, and oh what a surprise to find a museum with Iconic Furniture pieces intermixed with a lot of European, Asian, Native American, Egyptian, and some strange Contemporary Stuff that someone else calls “art”. ————————- WARNING: If you are easily offended by my silly notions of what looks good and is well built, please don’t read any farther. I’m just giving my opinions, that is what ...

Read this entry »


View CaptainSkully's profile

Arts & Crafts Dining Room Set #4: Change of Plans?

08-09-2009 07:59 AM by CaptainSkully | 3 comments »

Thanks in large part to WhatTheChuck, I’m giving serious thought to changing the design of the underbody of the table. With all due respect to Schroeder's table, which I prefer the looks of in many ways, I think the lack of a footrest underneath is a good thing, and the spindles underneath are magnificent, yet kind of a waste of time, energy, effort, and lumber as they’ll be hidden by chairs. I think the trestle-style design might be more pragmatic, and still embody the simplici...

Read this entry »


View brianl's profile

Finishing #1: Finding a stickley finish

05-12-2010 05:25 AM by brianl | 6 comments »

I have been working on a pair of nightstands for a while now and I’ve been trying to sort out what stain to use on them. They are quartersawn white oak and reproduction Stickleys so I wanted a nice older look. I started digging around in magazines, books, online, etc… and I found some great resources – like Captain Skully's forum post. Unfortunately, viewing something over the net always makes it appear a bit “off” to me. So I decided that I needed to prototy...

Read this entry »


View CaptainSkully's profile

Limbert Lamp Table - Stickley #240 #3: Jigs & Dry Fit

08-01-2009 05:38 AM by CaptainSkully | 2 comments »

Following TreeFrog as closely as possible, I cut out the blanks for the sides. I cheated a tad and used the wedges from the prototype to establish the tapers on the sides. One one side, I used one wedge, on the second side, I had to use both to compensate for the previous taper. These were cut with the blade at 90 degrees to the table saw to give me a point of reference when I’m cutting the miters. I created the jigs to hold the sides stable while I cut them at a 44 degree mit...

Read this entry »


View pintodeluxe's profile

Cherry Refreshment Table #1: Breadboard Ends and Tusk Tenons

02-02-2014 06:40 AM by pintodeluxe | 10 comments »

Here is my cherry refreshment table which will feature a single drawer and breadboard ends.-----I started by making breadboard mortises at the router table. The mortises are 1-1/4” deep and cut in multiple shallow passes. -----I used a 1/4” spiral bit to center a 3/8” groove in the breadboard ends. I made an initial pass in the standard right to left direction. Then I flipped the board end for end and made a pass from left to right to avoid a climb cut.-----I set up my t...

Read this entry »


1 2 3 4 ... 14 next »
133 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com