LumberJocks

Woodworking blog entries tagged with 'stickley'

  • Advertise with us
View CaptainSkully's profile

Arts & Crafts Dining Room Set #9: My New Stickley Finish!

01-09-2010 02:57 AM by CaptainSkully | 5 comments »

So I followed the recipe I synthesized for the pagoda tile frame and applied it to the top and breadboard ends. It turned out amazing! It looks like something right out of an antique store. Here’s the progression:..^ TransTint “Dark Mission Brown” aniline dye in isopropyl alcohol only (with flash on = more red)...^ Same with flash off (see how muddy it looks)..^ One coat of Zinser amber shellac (1 pound cut). Man shellac is a pain to work with. Once you paint it on, th...

Read this entry »


View CaptainSkully's profile

Arts & Crafts Dining Room Set #8: Welcome to the Big Top

01-09-2010 02:44 AM by CaptainSkully | 0 comments »

So, I decided to go with the Kevin Rodel Taliesin desk design as my table base. This involved a couple of hours of laying out. I had to account for leg room on the overhangs at the ends, I had to account for chair room on the long sides, I wanted 4” x 4” legs to balance the 3 3/4” breadboard ends, decent overhang on the sides, and this all had to miss the crap I’d already glued to the bottom of the table to make the sliders work. Whew! Like I said, it took several ...

Read this entry »


View CaptainSkully's profile

Arts & Crafts Dining Room Set #7: I have promises to keep, and miles to go before I sleep...

01-07-2010 09:09 AM by CaptainSkully | 5 comments »

When I bought the $500 worth of quartersawn white oak a few months ago, I promised my girlfriend that I’d make a dining table for Thanksgiving. We had to run down to the Caribbean for a business trip over Turkey Day (don’t cry for me), so we fried a turkey the weekend before. Long story short, Christmas and New Years came and went and we’re still serving it up on the MDF mock up. Sigh… I found an unexpected week off between sailing lessons (I’ve got 20 days w...

Read this entry »


View CaptainSkully's profile

Arts & Crafts Mantle Clock #3: Ordering

11-06-2009 06:11 PM by CaptainSkully | 2 comments »

I’m about to pull the trigger on my order from Klockit.com. I had a few questions about what to order, so I pinged their tech support. They don’t mention what size winding key to get. I’m assuming that it’s an eight-day movement, so that if you wind it every week, it’ll keep running. I grew up with clocks (i.e. grandfather, cuckoo, etc.), so I didn’t want a set that chimed. I think the pendulum length and swing will fit nicely with the design I’v...

Read this entry »


View CaptainSkully's profile

Arts & Crafts Mantle Clock #2: Disappointment

11-02-2009 05:34 PM by CaptainSkully | 7 comments »

I finally received my shipment from Rockler. I opened up the packaging for one set of the AA powered quartz movement w/ pendulum and one package of the hands that I had selected. I assembled them and hung them on the wall. It took me a second (literally) to realize that the second hand was moving backwards. Also, the pendulum wouldn’t keep swinging. The hands also kept coming off the drive shaft. I reassembled after verifying the diagram on the back of the packaging. Still unacce...

Read this entry »


View CaptainSkully's profile

Limbert Lamp Table - Stickley #240 #9: Finish Line

10-25-2009 09:40 PM by CaptainSkully | 7 comments »

I finally had a day to work on our stuff. With a little urging from my girlfriend to finish the fumed table sitting in our dining room, I bit the bullet and gave it a good shellacing. This was my first time using shellac. It’s pretty difficult to work with, as it dries fast and leave a build-up. I cut the Zinser Amber in half with denatured alcohol, and grabbed a beer for myself (I thought it only fair), and went to town on it. It gave it a nice, rich look. When that dried, I ...

Read this entry »


View CaptainSkully's profile

Arts & Crafts Mantle Clock #1: One for You, One for Me...

10-24-2009 06:56 PM by CaptainSkully | 8 comments »

I figured it was time to start another new blog. We’ve got friends that are getting married, and we wanted to give them something special. I figure the best gift you can give is one you want for yourself, so I’m going to make two while I’m at it. We originally thought about a mirror, but realized shipping it would be problematic. Then I thought about the clock project that had been bouncing around in the back of my head. After my usual extensive research, this is the de...

Read this entry »


View CaptainSkully's profile

Arts & Crafts Night Stands #5: Dry Fit!

09-17-2009 01:29 AM by CaptainSkully | 2 comments »

I was able to plane the stock for the shelves yesterday. I glued up a large enough blank for two shelves, then used the fence to cut them parallel. I then used the cross-cut sled to square the other sides. I got to use my Delta new mortiser to make all of the mortises (3 on each side x 4 sides = 12 total). Luckily, they were all 3/8” and had the same offset from the front/back. This meant that with one setup, I could knock them all out. If I had done them with a chisel, ...

Read this entry »


View CaptainSkully's profile

Limbert Lamp Table - Stickley #240 #8: Ammonia Fume Finish

09-12-2009 08:24 PM by CaptainSkully | 8 comments »

Well, after three days in solitary, I decided to pop the the weasel. The different boards fumed to different tones, but I think with shellac and brown furniture wax, it’ll be just non-perfect enough for some charm. The wood putty had no tannins in it, so it’s almost white. Luckily, one corner is perfect, so that’ll be the one facing out. I tried my Dark Fumed Oak aniline dye, and it didn’t work on the putty either. I even brushed the liquid ammonia directly on...

Read this entry »


View CaptainSkully's profile

Arts & Crafts Dining Room Set #6: The Hard Part

09-08-2009 11:30 PM by CaptainSkully | 3 comments »

So, today I ran over to Plywood & Lumber Sales in Oakland, CA and purchased about 100 board feet of quartersawn white oak. I finally have enough lumber to do the dining table. I’m going to start with the top and get that finished so I can bring it into the dining room and set it on top of my old table. This will get rid of the MDF table top we’ve been using for months. It’ll also let me use the MDF for more important things like jigs. I also abhor the tablecloth we&...

Read this entry »


« prev 1 ... 7 8 9 10 11 12 13 14 next »
133 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com